SoundCraft RK-65K manual Specifications

Page 32

Radio Key® RK-65K			Operating Guide
SPECIFICATIONS
Models	RK-65K		RK-65KS
Physical
Depth	0.60” (1.52 cm)		0.84” (2.13 cm)
Width	1.60” (4.06 cm)		3.20” (8.12 cm)
Height	3.50” (8.89 cm)		4.50 (11.43 cm)
Weight	2.88 oz. (81.65 gm)		6.67 oz. (189.15 gm)
Material	ABS		Lexan®
Color	Black		Beige
Power Requirements		5-14 VDC, 90 mA Max., 40 mA Idle
Wiegand Output		Any Wiegand Format up to 40 bits
Maximum Distance:		500 Ft.- 5 or 6 conductor 20 gauge
		shielded cable

Outputs

SPST Solid State Relay, 1A max. @60 VAC or DC. Normally open or normally closed (ﬁ eld programmable). May also be used with SecuRelayTM intelligent relay module (sold separately).

Inputs

Programmable as Remote Open (requires contact closure); Bicolor (Red or Green) LED Control or Buzzer/LED Control

Secura Key

29

Image 32

Contents With Dynascan Technology Stand Alone Proximity Access Control SystemWith RK100M instructions Copyright Radio Key RK-65K/RK-65KS Operating Guide Secura Key Radio Key RK-65KIntroduction Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100M+ 4 + 3 + + 1 + Lost or forgotten Password RK65K/RK100MSetting Facility Codes RK65K Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KDisable Timed Antipassback RK65K Enable Timed Antipassback RK65KSet Antipassback Timer RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting to RK100M Mode For RK65K mode + 6 +For RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User