First Alert FA148CPSSIA manual ∗163, ∗164, ∗166, ∗167, ∗168, ∗169, ∗170

∗160 Pager 1 Phone No.

Enter up to 20 digits. 0–9 #+11 = '✱' #+12 = '#'

#+13 = 2-second pause

If entering fewer than 20 digits, exit by pressing [∗] + next field number. To clear entries, press ∗160∗.

∗161 Pager 1 Characters

Enter the optional prefix characters, up to 16 digits.

0–9

#+11 = '✱' #+12 = '#'

#+13 = 2-second pause

Up to 16 optional characters may be sent as a prefix to the 7-digit system status code sent to Pager #1 (if used). Phone number in field *160 must have been entered. If fewer than 16 characters, exit by pressing [∗] and next field number. To clear entries: press ∗161∗. The 16 characters may be composed of the following:

PIN number, Subscriber account number,

∗(enter # + 11 to send ∗), # (enter # + 12 to send #), Pause (enter # + 13 to allow a 2-second pause),†

special character(s) the user may decide to transmit

† Some paging systems require pause(s) before the prefix.

The Pager format for the 7-digit status code is defined as follows: XXX- YYYY where:

XXX = 3-digit event code: 911 = Alarm, 811 = Trouble, 101 = Opening (disarm), 102 = Closing (arm AWAY)

YYYY = 4-digit user or zone number (depending on type of event). The first digit indicates partition (0 = system, 1 = part 1, 2 = part 2, 3 = common), followed by the 3-digit user or zone number.

Display Example 1. 9 1 1 – 1 0 0 4 Indicates an alarm (911) caused by a fault in zone 4 (0004) in part. 1.

Display Example 2. 1 0 2 – 2 0 0 5 Indicates the system is reporting a closing–system arming (102) by User 5 (0005) in partition 2.

∗162 Pager 1 Report Options

0 = no reports sent

1 = Opens/closes all users†

4 = All alarms and troubles

5 = All alarms / troubles, and opens/closes for all users

12 = Alarms / troubles for zones entered in zone list 9

13 = Alarms / troubles for zones entered in zone list 9, and opens/closes for all users

[0,0,0]

P1 P2 comm

For each partition, select from the listed options.

†For users enabled for paging. Reports to pager only when arming (close)/disarming (open) from a keypad using a security code; auto- arming/disarming, arming with assigned button, and keyswitch arming do not send pager messages.

∗163	Pager 2 Phone No.
	See field ∗160 for entries.	If entering fewer than 20 digits, exit by pressing [∗] + next field number.
		To clear entries, press ∗163∗.
	Pager 2 Characters
∗164
	See field ∗161 for entries.	If fewer than 16 characters, exit by pressing [∗] and next field number.
		To clear entries, press ∗164∗.

∗165 Pager 2 Report Options

See field *162 for reporting options.

[0,0,0]

P1 P2 comm

Select for each partition (use zone list 10 for options 12 or 13)

∗166	Pager 3 Phone No.
	See field ∗160 for entries.	If entering fewer than 20 digits, exit by pressing [∗] + next field number.
		To clear entries, press ∗166∗
	Pager 3 Characters
∗167
	See field ∗161 for entries.	If fewer than 16 characters, exit by pressing [∗] and next field number.
		To clear entries, press ∗167∗.
	Pager 3 Report Options
∗168					[0,0,0]
	See field *162 for reporting options.	P1	P2	comm
		Select for each partition (use zone list 11 for options 12 or 13).
	Pager 4 Phone No.
∗169
	See field ∗160 for entries.	If entering fewer than 20 digits, exit by pressing [∗] + next field number.
		To clear entries, press ∗169∗.
	Pager 4 Characters
∗170
	See field ∗161 for entries.	If fewer than 16 characters, exit by pressing [∗] and next field number.

To clear entries, press ∗170∗.

– 13 –