First Alert FA148CPSSIA manual ∗81 Zone List Menu Mode, Output Action, Output Number

“C”

01 Enter Zn No.

12

Zone Number

Press [✱] to continue.

(prompt appears if zone number was selected)

Enter the desired zone number associated with this output number. At the ENTER EVENT prompt, enter the zone event that will activate this output.

				01 Enter Event		0 = restore; 1 = alarm/fault/trouble
				Restore	0
				Press [✱] to continue to the “Output Action” prompt
		Output Action		Enter the desired device action.
01 Output Action
		0	= off
Close for 2 sec	1
		1	= Close for 2 seconds
		2	= Stay Closed
		3	= Pulse on & off (1 sec
			ON, 1 sec OFF)
		4	= Change Device State
		5	= Duration 1 (see data
			field *177)
		6	= Duration 2 (see data
			field *177)

Press [✱] to continue.

Enter Output No.

R0202

Output Number

01-16 = FA168CPS outputs

01-08 = FA148CP outputs

17-18 = on-board triggers Press [✱] to continue.

Enter the device output number (programmed in *79 Menu Mode) you want associated with this output.

02A E P TRIG

R02 1 1 3 ZL=00

Summary Screen	A summary screen appears showing the programmed settings.
Press [✱] to continue.	Press [∗] to return to OUTPUT FUNCTION NUMBER prompt

∗81 ZONE LIST MENU MODE

(press *81 while in Programming mode) The Zone List Worksheet is on page Error! Bookmark not defined..

Zone lists let you group individual zones for use with certain system actions. Using this mode, simply select an appropriate zone list number, then add the desired zone numbers to be included in that list.

The following table shows the available zone lists and their purposes:

List No.		Used for…		Notes
1, 2	general purpose (GP)			• Any list may include any or all of the system's zone numbers.
3		chime-by-zone(see field *26 to enable option)		• A zone list can be assigned to more than one output relay.
4		cross zones (see note at right)		• Zone List 4: When creating zone list 4 for cross zoning,
5		night stay zones		include only zones assigned to zone types 3, 4, or 5. Do not
6		general purpose		include zones that have delays (entry/exit zones, interior
		SIA-Compliant	: dial delay disable	w/delay) or 24-hour zones, as these zone types may produce
7		general purpose		unpredictable operation and may not function as intended.
		SIA-Compliant	: unlimited reports	See field *85 for Cross Zone Timer option.
8		general purpose		• Zone List 6:		: See field *50 for Dial Delay Disable
					SIA-Compliant
9	zones that activate Pager 1
				option.
10	zones that activate Pager 2
				• Zone List 7:	SIA-Compliant	: See field *93 for Unlimited Reports
11	zones that activate Pager 3 (FA168CPS)
				option.
12	zones that activate Pager 4 (FA168CPS)

*81 Menu Mode

		Zone List Number	Enter the Zone List Number to program (or 00 to quit). Press [✱]
Zone List No.
		01-12 = zone list number	to advance.
(00 = Quit)	01
		[∗] to continue	In the following displays, zone list 01 has been selected.
		Zone Number	Enter each zone number to add to the zone list, followed by
01 Enter Zn Num.
		01-64†= zone numbers	pressing [✱] (example, 01✱, 02✱, 03✱). After all zones are
(00 = Quit)	00
		followed by [∗] to	entered, press 00 to continue.
			IMPORTANT: Do not include fire zones in zone lists that are
		accept each zone
			used to STOP device actions.
		00 to continue
			† FA168CPS = 01-64; FA148CP = 01-06, 09-34, 49-56.

01 Del Zn List?

0 = No 1 = Yes 0

Deleting Zone Lists

0 = don’t delete list

1 = delete this zone list [∗] to continue

To delete the zone list, enter 1. All zones in the zone list will be deleted automatically and the system returns to the Zone List No. prompt.

To save the zone list, enter 0.

– 27 –