First Alert FA148CPSSIA ∗57 Function KEY Programming Menu Mode, Function Key, Partition Number

For the Function key selected, the functions are predefined as follows:

If A selected = Zone 95 (emergency key, same as [1] [∗] pair) If B selected = Zone 99 (emergency key, same as [∗] [#] pair) If C selected = Zone 96 (emergency key, same as [3] [#] pair) If D selected = Single-button paging

Single-button paging (sends a 999-9999 message to pager) Display time

Arm AWAY (reports as User 00 if closing reports are enabled) Arm STAY (reports as User 00 if closing reports are enabled) Arm NIGHT-STAY (reports as User 00 if closing reports enabled)

Step Arming (arms STAY, then NIGHT-STAY†††, then AWAY) Output Device Command (for device programmed as system operation type 66–function key in *80 Menu Mode) Communication Test (sends Contact ID code 601)

Macro Key 1 (define macro by user code + [#] [6] [6] command) Macro Key 2 (define macro by user code + [#] [6] [6] command)

∗57 FUNCTION KEY PROGRAMMING MENU MODE

(press ∗57 while in Data Programming mode).

The system provides the ability to program each of the four keypad function keys to perform one of 12 system operations. The end user can then activate the function by simply pressing and holding the programmed key for 2 seconds. Typical functions (listed below) include single-button arming, turning lights on/off, or single-button paging.

To assign emergency key functions (function key option “00”), first program the respective emergency zone number (95 for “A” key, 96 for “C” key, 99 for “B” key) with the desired zone type using ∗56 (or ∗58) Zone Programming mode, then use ∗57 Function Key menu mode to assign the desired key.

To use a function key to activate a relay action (∗57 Menu mode key function 07), use ∗79 Menu mode to map the output, and use ∗80 Menu mode to define the output’s action; select system operation type “66.”

To use a function key for a user macro, use ∗57 menu mode to activate the desired key, then define the actual macro functions using the user code + [#] + [6] [6] command.

Press Key to Pgm
0 = Quit	0

Function Key

Press the desired function key, A-D.

[∗] to continue

0 = Exit this mode

Press the desired function key (A-D) you want to program. NOTE: A key programmed as a function key is no longer available to be used as an end-user macro key or panic key.

A	1	OFF	2	AWAY	3	STAY
B	4	MAX	5	TEST	6	BYPASS	-00-001-V0
C	7	INSTANT	8	CODE	9	CHECK
D	* READY		0		#		keypad keys

Partition

1

Partition Number		Enter the partition in which the function key is active.
(FA168CPS)
1	= partition 1
2	= partition 2
3	= common partition

[∗] to continue

Key "A" Func
Zone 95	00

Define Key Function

00-12 = see list at right

[∗] to continue; returns to key number prompt with the next function key letter displayed

Enter the desired function for this key, 00 to 12, from the options listed. (00 selected for example display shown at left). Press [∗] to returns to key number prompt with the next function key letter displayed.

00† =

01 =

02 =

03 =

04 =

05 =

06 =

07 =

08 =

09 =

10 =

11†† = Macro Key 3 (define macro by user code + [#] [6] [6] command) 12†† = Macro Key 4 (define macro by user code + [#] [6] [6] command)

† System defaults to these function key settings.

††Macros 11-12 apply to FA168CPS only.

††† If Night-Stay zones are listed in zone list 5

– 23 –