XMIT TO CONFIRM PRESS ✱ TO SKIP
Confirm | • If “Yes” was entered at the SET TO CONFIRM? prompt |
[∗] to continue | previously (see first prompt following entry into the ∗58 |
| Expert Programming Mode), the display on the left will |
| appear. Confirm serial and loop numbers by activating the |
| wireless key. |
|
|
|
| IMPORTANT: |
|
|
|
| When confirmed, the key is not active for arming/disarming until |
|
|
|
| it is assigned to a user number (using the assigning attributes |
|
|
|
| command, attribute “4”). See System Operation section for |
|
|
|
| procedure. |
|
|
| Not Confirmed | If the serial number transmitted does not match the serial |
| Entd | |||
| [∗] to continue | number entered, a display similar to the one shown will appear. | ||
| Rcvd | |||
|
| If the loop number does not match, it will also be displayed. | ||
|
|
|
|
|
If so, activate the button on the wireless key once again. If a match is not obtained (i.e., summary display does not appear), press the [#] key and then enter the correct serial number.
If the serial number transmitted matches the serial number entered, the keypad will beep 3 times and will return you to the Zone Number prompt to enter the starting zone for the next wireless key.
Or you can return to *58 Menu mode by pressing 00 at the Zone Number prompt.
NOTE: Following the successful enrollment of each wireless device, remove ONE of the serial number labels from the device and affix it in the appropriate column on the ZONE PROGRAMMING worksheet of the Programming Form; then enter the other information (zone number, zone type, loop number, etc.) relevant to that device.
Wireless Key Predefined Default Templates
|
| LOOP 3 | |
YOU MUST | OFF | LOOP 2 | |
PROGRAM | |||
ON |
| ||
THIS BUTTON |
| LOOP 1 | |
LOOP 4 |
|
ENROLL AS "BR"
5 8 0 4 - 0 0 1 - V 1
5804 Wireless Key Transmitter
Note:
These transmitters are not intended for use in UL installations.
GREEN/YELLOW |
|
|
|
LED |
|
| LOOP 2 |
RED/YELLOW |
|
| LOOP 4 |
LED |
|
| |
|
| (YOU MUST | |
|
|
| |
|
|
| PROGRAM |
|
|
| THIS BUTTON) |
LOOP 3 |
|
|
|
|
|
| LOOP 1 |
• | • • | • | • |
• | • | ||
• | •• | • | |
••• | •• | ||
ENROLL AS "BR" | •• | • |
|
|
| 5 8 0 4 B D - 0 0 7 - V 0 |
5804BD 2-Way Wireless Key
Transmitter
| For 5804 |
|
|
| For 5804BD |
| ||
TEMPLATE 1 | Loop | Function | Zone Type |
| TEMPLATE 4 | Loop | Function | Zone Type |
| 1 | No Response | 23 |
|
| 1 | No Response | 23 |
| 2 | Disarm | 22 |
|
| 2 | No Response | 23 |
| 3 | Arm Away | 21 |
|
| 3 | Arm Away | 21 |
| 4 | No Response | 23 |
|
| 4 | Disarm | 22 |
TEMPLATE 2 | Loop | Function | Zone Type |
| TEMPLATE 5 | Loop | Function | Zone Type |
| 1 | No Response | 23 |
|
| 1 | No Response | 23 |
| 2 | Disarm | 22 |
|
| 2 | Arm Stay | 20 |
| 3 | Arm Away | 21 |
|
| 3 | Arm Away | 21 |
| 4 | Arm Stay | 20 |
|
| 4 | Disarm | 22 |
TEMPLATE 3 | Loop | Function | Zone Type |
| TEMPLATE 6 | Loop | Function | Zone Type |
| 1 | 7 |
|
| 1 | 7 | ||
| 2 | Disarm | 22 |
|
| 2 | Arm Stay | 20 |
| 3 | Arm Away | 21 |
|
| 3 | Arm Away | 21 |
| 4 | Arm Stay | 20 |
|
| 4 | Disarm | 22 |
– 22 –