First Alert FA148CPSSIA Configurable Zone Types Worksheets, Entries for Fields *182 and *184

CONFIGURABLE ZONE TYPES WORKSHEETS

Configurable zone types 90 and 91 can be programmed via downloader software or from a keypad using data fields*182-*185. Configurable zone types 92 and 93 (FA168CPS only) can only be programmed using the downloader software.

Programming Configurable Zone Type options involves making 10 entries in data field *182 for zone type 90 and field *184 for zone type 91, where each entry represents the sum of the values of the various options shown in the tables below. Use fields *183 and *185 to program Contact ID report codes for these zone types.

ENTRY 1 (See note 5 for RF zones) ENTRY 2 (See note 5 for RF zones)

Response when system disarmed and zone is:							Auto
	Intact EOL		Open		Shorted		Restore		Vent Zone
RF zone normal			RF zone N/A	RF zn off-normal
0	= normal	0	= normal	0	= normal	0	= no	0	= no
1	= alarm	4	= alarm	1	= alarm	4	= yes	8	= yes
2	= trouble	8	= trouble	2	= trouble
3	= fault	12 = fault		3	= fault
Entry 1 = EOL +		Open		Entry 2 = Short + auto restore + vent zone
ENTRY 3 (See note 5 for RF zones)				ENTRY 4 (See note 5 for RF zones)
Response when armed STAY and zone is:							Byp. when		Byp. when
	Intact EOL		Open		Shorted		disarmed		armed
RF zone normal			RF zone N/A	RF zn off-normal
0	= normal	0	= normal	0	= normal	0	= no	0	= no
1	= alarm	4	= alarm	1	= alarm	4	= yes	8	= yes
2	= trouble	8	= trouble	2	= trouble
3	= fault	12 = fault		3	= fault
Entry 3 = EOL +		Open		Entry 4 = Short + byp. disarmed + byp. armed

ENTRY 5 (See note 5 for RF zones) ENTRY 6 (See note 5 for RF zones)

Response when armed AWAY and zone is:							Dial Delay		Fault Delay
	Intact EOL		Open		Shorted	(see field *50)		(see field *87)
RF zone normal			RF zone N/A	RF zn off-normal
0	= normal	0	= normal	0	= normal	0	= no	0	= no
1	= alarm	4	= alarm	1	= alarm	4	= use delay	8	= use delay
2	= trouble	8	= trouble	2	= trouble
3	= fault	12 = fault		3	= fault			see note 1
Entry 5 = EOL +		Open		Entry 6 = Short + dial delay + fault delay

ENTRY 7		ENTRY 8
Display Faults	Power Reset/	Use Entry	Use Exit	Respond as
	Verification	Delay 1/2	Delay	Interior Type
0 = show alarms	0 = no	0 = no	0 = no	0 = no
when armed	4 = power reset	1 = delay 1	4 = use exit	8 = yes
& disarmed	after fault	2 = delay 2	delay	see note 2
1 = don’t show	(by code + OFF)
alarms when	12 = verification
armed (show	(see zone
alarms, trbles,	type 16)
faults when
disarmed)
3 = never show
any alarms,
trbles, faults
Entry 7 = fault display + power		Entry 8 = entry delay 1/entry delay 2 + exit delay +
reset/verification		interior zone type

	ENTRY 9				ENTRY 10
	Alarm Sounds		Use Bell	Respond as		Trouble	Chime when
			Timeout	Fire Zone		Sounds	Chime Mode On
0		= none	0 = no	0 = no	0	= none	0 = no
1		= steady	4 = yes	8 = yes	1	= periodic	4 = yes
		keypad				beep
2		= steady bell	see fields *32,	see zone type	2	= trouble
		and keypad	*33	09; see note 4		beeps
3		= pulsing bell
		and keypad
	Entry 9 = alarm		sounds + bell timeout + fire zone		Entry 10 = trouble sounds + chime

Entries for Fields *182 and *184

Entry Zone Type 90	Zone Type 91
(field *182)	(field *184)

1

2

3

4

5

6

7

8

9

10

To calculate the value for each entry: Simply add the values of the selected options in each of the entry’s columns (one option per column). For example, to program Entry 2 for “alarm response to short,” “auto restore on,” but not a “vent zone,” enter 5 (“1” for alarm short + “4” for auto restore yes + “0” for vent zone no).

INTACT	OPEN	SHORTED
EOL
		ZONE-003-V0

Zone Conditions Represented

in Entries 1-6

NOTES:

1.Do not use the “fault delay” option with a configurable zone type if it is set for an entry or exit delay, otherwise unpredictable results may occur.

2.To create an interior type zone, select “respond as interior zone type” (entry 8, interior type = yes), and set zone response to “fault” in entries 3-4 to ensure fault displays; do not set as “normal,” “alarm,” or “trouble.”

3.Do not set fire zones to respond as a

“fault” (entries 1-6), otherwise faults will not display unless the [∗] key is pressed.

4.4219/4229 modules must use EOLRs or unpredictable results may occur.

5.RF Zones: The “open” option in entries 1, 3, and 5 is not applicable for RF zones. Use the “intact EOL” option for normal RF zone conditions and “shorted” for off- normal RF zone conditions.

6.a. Zone-Doubling/Double-Balanced: A short on either zone of a zone-doubled pair or on a double-balanced zone causes a tamper condition.

b.For double-balanced zones, this entry must be “0.”

c.For zone-doubled zones, both zones of the doubled pair must be assigned the same response to a short.

– 17 –