Heat & Glo LifeStyle SLR (COSMO) owner manual Top Vent Vertical Termination Venting with 2 elbows

Top Vent - Vertical Termination

Venting with 2 elbows

					SLR
	V1 Minimum			H Maximum		V2	V1 + V2 Minimum
		90° Elbow		2 ft.	610 mm	*	*
	1 ft,		152 mm	3 ft.	914 mm	*	*
	2 ft.		457 mm	5 ft.	1.5 m	*	*
Î	3 ft.		914 mm	7 ft.	2.1 m	*	*
	4 ft.		1.1 m	15 ft.	4.6 m	*	*
				H MAX. =15 ft. (4.6 m)
				V1 + V2 + H MAX. = 40 ft. (12.2 m)
		* No specific restrictions on this value EXCEPT V1 + V2 + H cannot exceed 40 ft. (12.2 m)

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 7.3).

V2

H1

Figure 7.11

V1

28 Heat & Glo • SLR • 2143-900 Rev. B • 7/08