Nilfisk-ALTO 7309021 user manual Mounting base

2.2Mounting base

If the base is uneven height adjustments may be made by adjusting the counter nut (1) on the machine foot (2) as shown on Fig. 1.

It is important that the plant is adjusted to horizontal position. Otherwise it may be a problem opening the cabinet door.

Fig. 1

2

1

It is advisable to fix the module frame of the system to both the bulk- head and bottom when mounting the system in ships.

The tip over safety devices (3) (which are available as an accessory) should be placed diagonally on the plant and mounted between the machine feet and the floor stands as shown on Fig. 2. Fasten the fittings securely to the floor with 4 pcs. ∅8 mm hexagon-headed screws complete with expansion bushes or with 4 anchors of the impact type.

Fig. 2

3

33