Wayne-Dalton 3320B, 3324B, 3322B-Z, 3224C-Z Must be Adjusted Properly, Shown in FIG, With Step

IMounting Door Bracket To A(9100, 9400, 9600, 5120 & 5140 Series Door)

Tools Needed:	IMPORTANT: WHEN CONNECTING A
	TROLLEY TYPE GARAGE DOOR OPENER
Power Drill	TO THE ABOVE LISTED DOORS, A WAYNE-
	DALTON OPENER/TROLLEY BRACKET
	MUST BE SECURELY ATTACHED TO THE
7/16” Socket	TOP SECTION OF THE DOOR, ALONG WITH
Driver	ANY U-BARS PROVIDED WITH THE DOOR.
	THE INSTALLATION OF THE OPENER MUST
Vice Clamps	BE ACCORDING TO MANUFACTURER’S
	INSTRUCTIONS AND FORCE SETTINGS
	MUST BE ADJUSTED PROPERLY.
Phillips Head	Locate the center of the top section and seat
Screwdriver
	the door bracket on male part of the top
	section. The door bracket must be centered
	and positioned on top section so it bridges
	the transition point of the section thickness,
	as shown in FIG. 1.1 and 1.2. Install (2) #12
	x 1/2” phillips head screws on the opposite
	side of door bracket, as shown in FIG. 1.3. If
	initially supplied ubar is on the door, clamp
	door bracket to u-bar, as shown in FIG. 1.4.
	First attach (3) 1/4” - 14 x 5/8” self-tapping
	screws to the door bracket, as shown in
	FIG. 1.5. Then attach (2) 1/4” - 14 x 5/8”
	self-tapping screws to the door bracket, as
	shown in FIG. 1.6. Remove vice clamps.
	NOTE: If you have a 9100 door, you can use
	two of the 1/4” - 20 x 11/16” self-drilling
	screws used to attach the u-bar instead of
	the 1/4” - 14 x 5/8” self-tapping screws
	when attaching door bracket to u-bar, as
	shown in FIG. 1.6.
	NOTE: When attaching door bracket to top
	section with u-bar, apply additional pressure
	to thread fasteners into the u-bar.
	NOTE: See FIG. 1.7 for installing door
	bracket on top section without u-bars.
	NOTE: After completing this step, continue
	with Step 7.

Align Tab With Center		Male Part Of Top
		Section
Line Of Top Section
	Door Bracket

Door Bracket

Top Section With Or

Without U-Bar

FIG. 1.1 FIG. 1.2

Door Bracket

Opposite Side Of

Door Bracket

U-BAR

(2) #12 x 1/2”
Phillips Head Screws	Vice Clamp
	NOTE: Not Required
	For J-Struts

FIG. 1.3	FIG. 1.4
	(2) 1/4”-14 x 5/8”
	Self Tapping Screws
Door Bracket

Door Bracket

	U
	-
	BAR
	U
	-
(3) 1/4”-14 x 5/8”	BAR
Self Tapping Screws	(2) 1/4”-20 x 11/16”
	Self Drilling Screws
FIG. 1.5	FIG. 1.6
	Door Bracket

(5)1/4”-14 x 5/8” Self Tapping Screws

Fig. 1.7 Top Section Without U-Bar

22Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com