Wayne-Dalton 3324B-Z Mounting Door Bracket, Installing Light, Manufacturer for Proper

Page 11

6Mounting Door Bracket

Tools Needed:

NOTE: If you have a 5120, 5140, 9100,

 

9400, 9600, 9700 or 9800 series door,

7/16” Socket

do not install this door bracket, install the

 

door bracket supplied with the door, see the

Ratchet Wrench

Installation Instructions and Owner’s Manual

supplied with the door. Instructions manuals

 

 

are available for download at www.wayne-

 

dalton.com or call 1-888-827-3667.

 

IMPORTANT: DOORS MAY NEED TO BE

 

REINFORCED TO PREVENT DAMAGE TO THE

 

DOOR. CHECK WITH THE GARAGE DOOR

 

MANUFACTURER FOR PROPER

 

REINFORCING OF YOUR DOOR.

 

For wood doors, mount door bracket,

 

using two 1/4”-20 x 2” carriage bolts and

 

1/4” locking nuts supplied, on center line of

 

door with middle hole in line with top rollers.

 

For metal doors, mount door bracket,

 

using two 1/4”-20 x 5/8” self drilling screws

 

supplied, on center line of door with middle

 

hole in line with top rollers.

Reinforce Door Vertically and

Horizontally

Top Roller

Guideline

Door Center

Line

Door Center

Line

1/4”-20 x 2” Carriage Bolts

Top Roller

Guideline1/4”

Locking Nuts

Top Roller

1/4”-20 x 1/2”

WOOD

Door

DOORS

Guideline

Self Drilling Screws

Bracket

 

STEEL Door

DOORS Bracket

7

Installing Light

 

 

 

Tools Needed:

Remove lens by pressing up on both sides

 

of the bottom of the lens at the junction of

None

the housing, releasing the locking tabs, and

 

pulling forward.

 

Screw a 60 watt (Maximum) bulb into

 

socket. For maximum bulb life, “rough

 

service” bulbs are recommended.

 

Align the top and bottom tabs on the lens

 

with the housing and push straight on until

 

lens locks in place.

 

 

Housing

Bulb - 60 Watt

 

 

Maximum

 

 

(Not Supplied)

 

 

 

Socket

Locking Tabs

Lens

PRE-OPERATION

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need 5 You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents New 9/18/2008 Important NoticeGarage Doors & Openers Package Contents Page Door Test Two Pre-InstallationDisconnect from power source and proceed to assembly Door Test OneHomelink Compatibility Rolling Code Technology System FeaturesTools Needed Definition of key words used in this manual Table of ContentsAttaching Opener to Rail InstallationReinforce the Header Wall Positioning and Installing Front Wall BracketService Person AT Least 3 Feet Long Positioning MotorEnd of Opener Attach Unit to Front Wall BracketMounting Opener End Proper InstallationReinforcing of Your Door Installing LightMounting Door Bracket Manufacturer for ProperGarage Door Wired Wall Station Installation If IncludedDoor can be Seen When Wall Station Near or Next toChildren and in a Location Where Wall Station Installation If IncludedWall Station Near or Next to Garage Door Wall Station OUT of the ReachConvenient location next to the wall station EntrapmentApply entrapment warning label in a Not adhereWasher Wired Infrared Safety Sensor InstallationWall Mounting Bracket Door Jam NutSensor to Opener Installation of Wiring for WiredInfrared Safety Sensor Connecting Wired Infrared SafetyCord in Anyway Connecting OpenerConnecting Trolley To Latch AssemblyFully Closed Position Alignment of Wired InfraredSafety Sensors Be Closed by ContinuouslyTo Avoid Possible Injury or Setting Trolley Close PositionARM Connecting Door Arm to Door Setting Door Opening Travel Setting Door Close TravelStop Bolt Trolley Opener Fatal Injury MAY Result Contact Obstruction TestTo Prevent Door Damage or Programming Wireless KeylessEntry If Included Possible Personal InjuryMaterials Important Install ALL WallWood framing using the two screws Surface inside garageInstructions Illustrated Power ConnectionTo Avoid Electrical Shock Important Check Your Local14 x 5/8 self tapping screws as shown in FIG Optional InstallationsTools Needed Power Drill Socket Driver Mounting Door Bracket To Series DoorShown in FIG Must be Adjusted ProperlyImportant When Connecting a BARLOW Headroom Radius Being UsedTrack For Portland TrackDIM Type of ARM Connecting Door ArmDetermine the WAYNE-DALTON Track Radius Being Used 15-18 LOW Headroom Trolley Positioning Chart forOptional Hookup LOW Headroom TrolleyDoor activation HOW the Light Works and What IT Means When IT FlashesOperation Read and Follow ALL InstructionsOperating the Wireless Wall Station Up/Down Button Customizing the SettingsOpener Controls Teaching HomeLink to the opener Primary Programming for HomeLink to the ProdriveProgramming/Training HomeLink Unit Alternate Programming for HomeLink to the Prodrive Opening Force Adjustment AdjustmentsAdjustment # 1 Opening and Closing Force Closing Force AdjustmentLarge Button Tools Needed NoneTransmitter Wall StationTwice a Year MaintenanceBattery Replacement for Wall Station Symptom Probable Cause Corrective Action  TroubleshootingMAINTENANCE/ Troubleshooting Description # Per Unit Parts Breakdown Rail Assembly All Models2524 Parts Breakdown Opener Assembly And Accessories All Models80ft gauge, 2 conductor polarized. UL listed CL-2, 75deg. C Prodrive AccessoriesWireless Keyless Entry Multifunction Button Pre-drill 3/32 pilot holeDrill Template Pre-drill 5/64 pilot holeThank you for your purchase Please Do Not Return This Product To The StoreReplacement labor Lifetime Limited WarrantyFCC and IC Statement Patent InformationPieza nro ¡AVISO ImportanteContenido del paquete Page Costado derecho del accionador Antes de la instalaciónPrueba uno de la puerta Prueba dos de la puertaHerramientas necesarias Características del sistemaLeer Y Seguir Todas LAS Instrucciones DE Instalación Tabla de materiasTransmisión Montaje del accionador en el rielInstalación Travesaño y cerrar la puerta Del garajeFrontal PuertaPosicionamiento del extremo Motor del accionador Fijar la unidad en el soporte De pared frontalDel accionador Montaje del extremoApropiado Para LA Puerta Montaje de soporte de puertaOperación Instalación de iluminaciónApropiado CON EL Interruptor LA Estación DE Pared Fuera DELDE Garaje Causar EL Malfuncionamiento DEL AccionadorLA Puerta DE Garaje Adhesivo no funciona Instalación de la estaciónEtiqueta de advertencia Sobre aprisionamientoArandela De seguridad, cableadoInstalación de sensor infrarrojo Herramientas necesariasSeguridad cableado al accionador Instalación de cableadoConexión del sensor infrarrojo de Conjunto del pestillo Conexión del accionadorAl tomacorriente Conexión del trole alCompletamente Cerrada Alineación de los sensoresLesiones Personales Desplace Hasta LA PosiciónMóvil DE LA Puerta Configuración de la posiciónCerrada del trole 10 a Conexión de brazoPara puerta a puerta Modelos 9700 yDe apertura de la puerta Calibración de recorridoDe cierre de la puerta Calibración del recorridoPerno de tope Trole Accionador Causar Lesiones Graves O Fatales Prueba de obstrucciónPor contacto Prueba de obstrucción Del sensor de seguridadPosibles Lesiones Personales Programación del accesoInalámbrico sin llave HerramientasEn otros materiales Instalación del accesoUbicación de cada tornillo GarajeIlustradas Conexión eléctrica opción de Cableado permanentePara LA Sección Superior CON Barra U Montaje de soporte de puerta Una puerta SerieInstalaciones Opcionales Taladro eléctrico Vástago de cubo De 7/16˝Presión Montaje del soporte de puerta a unaContinuar con el Paso Mordazas deDel brazo de la puerta De cierre del trole / ConexiónConexión Opcional Franqueo Superior ReducidoEn la página Configuración de la posición deCierre del trole / Conexión del El trole y reinstalar la chaveta hendidaRiel con franqueo Superior reducido Brazo curvo CON Franqueo Superior ReducidoParte inferior Del accionadorCómo Funciona LA LUZ Y QUÉ Significa Cuando Destella Leer Y Seguir Todas LAS InstruccionesJamás Ubicarse Bajo UNA Puerta PARADA, Parcialmente Abierta Activación de la puertaOperación de la estación inalámbrica de pared Comenzar con la puerta en la posición cerrada Personalización de la configuraciónControles del accionador Posición personalizada para mascotasProgramación primaria de HomeLink para Prodrive Programación alternativa de HomeLink para Prodrive Ajuste DE LA Fuerza DE Apertura AjustesAjuste DE LA Fuerza DE Cierre Estación DE Pared TransmisorTransmisor Cambio de pilas para la estación de pared MantenimientoDos veces al año Síntoma Causa Probable Acción Correctiva  Diagnóstico y resolución de problemasMantenimiento / Diagnóstico Y Resolución DE Problemas 309960 Conjunto de pestillo para cadena 18b 325687 Pieza Nro. porNro Descripción Unidad Nro. por unidadAcceso inalámbrico sin llave de 5 botones Transitorias MOV 252993 Interruptor de límites 311365Juego de sensor infrarrojo de seguridad Cordón de suministro eléctricoAcceso inalámbrico Accesorios del ProdriveDe operación a radiofrecuencia Para instalación en paredPre-drill 3/32 pilot hole Pre-drill 5/64 pilot holePlantilla DE Perforación Plantilla recortable para ayudar en la instalaciónGracias por su compra Cualquier pregunta y/o enviarán cualquier pieza necesariaGarantía Limitada DE POR Vida Información normativa de la FCC Información sobre patentesDeclaración de la FCC e IC

3324B-Z specifications

Wayne-Dalton is renowned for its commitment to innovative door solutions, and the Wayne-Dalton 3324B-Z is a prime example of their cutting-edge offerings in the realm of garage doors. This model is designed for residential settings, combining aesthetics with functionality.

One of the standout features of the 3324B-Z is its construction. The door is made from high-quality steel, ensuring exceptional durability and resistance to external elements. This steel is reinforced to provide strength and support, which is critical for maintaining the stability of the door over time. Moreover, the door is insulated with polyurethane, offering enhanced thermal efficiency. This insulation not only helps to regulate temperature within the garage but also contributes to energy savings by reducing heating and cooling costs.

Aesthetic appeal is another hallmark of the Wayne-Dalton 3324B-Z. Featuring a contemporary design, it is available in multiple color options and finishes, allowing homeowners to customize the look of their home while enhancing curb appeal. The door's design includes raised panel sections that add depth and texture, making it visually appealing without compromising on functionality.

In terms of technology, the Wayne-Dalton 3324B-Z integrates various advancements to enhance user experience and safety. It is equipped with a reliable spring system that promotes smooth operation and extends the lifespan of the door. The door can also be paired with Wayne-Dalton's innovative Quantum garage door opener, which features advanced security and remote access capabilities, allowing homeowners to operate their doors from anywhere via a smartphone app.

Safety is a paramount consideration in the design of the 3324B-Z. The door incorporates features such as pinch-resistant design, reinforced hinges, and safety sensors to protect users and pets from potential accidents during operation.

Installation and maintenance are also simplified with the Wayne-Dalton 3324B-Z. The door comes with detailed instructions for easy setup, and its durable materials require minimal upkeep, ensuring a long-lasting performance with minimal hassle.

In conclusion, the Wayne-Dalton 3324B-Z is a sophisticated choice for any homeowner seeking a balance of style, durability, and advanced technology. Its robust construction, attractive design, and safety features make it an ideal addition to modern homes. Whether upgrading an existing garage door or installing a new one, the 3324B-Z is a solution that stands out in functionality and aesthetics.
Top Page Image Contents