Wayne-Dalton 3324B-Z installation instructions System Features, Tools Needed

Page 5

System Features

1. Open and Close Cycle Control:

Allows garage door to be started and stopped by push button, transmitter or wall station. The next impulse sends a stopped garage door in opposite direction.

2. Emergency Disconnect:

Manual disconnect permitting operation of door during power failure with automatic reconnect when opener is reactivated. See page 27.

3. Opener light:

Automatically turns on when opener is activated and remains on for four minutes for convenience and safety.

4. Mechanical Door Lock:

When properly adjusted, opener locks door in closed position preventing unwanted entry. See Adjustment # 3 on page 32.

5. Obstruction Warning Light:

The convenience light will fl ash after sensing an obstruction in the down direction and/or if the safety system malfunctions while in the open position.

6. Motor:

Permanently lubricated, thermally protected, heavy duty motor with automatic reset.

7. Safety System:

Independent up and down force adjustments. When properly adjusted, the safety system will automatically reverse the door when obstructed in down direction and return to fully open position. The door will stop when obstructed in the up direction. See Adjustment #2 on page 32.

8. Infrared Safety Sensors:

Wired infrared safety sensors detect an obstruction in door path and react by reversing door.

9. Multi-Function Wall Station:

Wired wall station provides up/down door motion control and independent overhead light on/off control. Wireless multi-function wall station provides up/down door motion control, independent overhead light on/off control, door down delay, adjustable “pet position” function, and “pet position” program button.

10. Homelink® Compatibility:

Opener is capable of “learning” automobile equipped Homelink® transceivers. Visit: www.homelink.com.

11. Rolling Code Technology:

Wireless transmitters, multi-function wall stations and wireless keyless entry use rolling code which prevent would be thieves from “grabbing” the transmitter’s digital code.

 

Tools Needed

 

 

 

 

 

Power Drill

Ratchet Wrench

Needle Nose Pliers

Pliers/Wire Cutters

5/64”, 3/32”, 1/8”, 3/16”

Hacksaw

 

 

 

 

 

Drill Bits

 

Phillips Head

1/4”, 3/8”, 7/16”,

Pencil

 

7/16” Wrench

Pliers

Screwdriver

1/2”, 9/16” Sockets

 

 

 

 

 

 

 

 

 

 

 

Hammer

Flat Tip

7/16” Socket Driver

Level

 

 

2 x 4 Board

 

Screwdriver

 

 

 

 

 

 

Tape Measure

Safety Glasses

Adjustable Wrench

 

2 x 6 x 12 Solid Test

Non-Metallic

 

 

 

 

 

Object

Step Ladder

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need IV You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents New 9/18/2008 Important NoticeGarage Doors & Openers Package Contents Page Disconnect from power source and proceed to assembly Pre-InstallationDoor Test One Door Test TwoHomelink Compatibility Rolling Code Technology System FeaturesTools Needed Definition of key words used in this manual Table of ContentsAttaching Opener to Rail InstallationReinforce the Header Wall Positioning and Installing Front Wall BracketService Person End of Opener Positioning MotorAttach Unit to Front Wall Bracket AT Least 3 Feet LongMounting Opener End Proper InstallationMounting Door Bracket Installing LightManufacturer for Proper Reinforcing of Your DoorDoor can be Seen When Wired Wall Station Installation If IncludedWall Station Near or Next to Garage DoorWall Station Near or Next to Garage Door Wall Station Installation If IncludedWall Station OUT of the Reach Children and in a Location WhereApply entrapment warning label in a EntrapmentNot adhere Convenient location next to the wall stationWall Mounting Bracket Door Jam Wired Infrared Safety Sensor InstallationNut WasherInfrared Safety Sensor Installation of Wiring for WiredConnecting Wired Infrared Safety Sensor to OpenerConnecting Trolley Connecting OpenerTo Latch Assembly Cord in AnywaySafety Sensors Alignment of Wired InfraredBe Closed by Continuously Fully Closed PositionTo Avoid Possible Injury or Setting Trolley Close PositionARM Connecting Door Arm to Door Setting Door Opening Travel Setting Door Close TravelStop Bolt Trolley Opener Fatal Injury MAY Result Contact Obstruction TestEntry If Included Programming Wireless KeylessPossible Personal Injury To Prevent Door Damage orWood framing using the two screws Important Install ALL WallSurface inside garage MaterialsTo Avoid Electrical Shock Power ConnectionImportant Check Your Local Instructions IllustratedTools Needed Power Drill Socket Driver Optional InstallationsMounting Door Bracket To Series Door 14 x 5/8 self tapping screws as shown in FIGImportant When Connecting a Must be Adjusted ProperlyBAR Shown in FIGTrack Radius Being UsedFor Portland Track LOW HeadroomDIM Type of ARM Connecting Door ArmDetermine the WAYNE-DALTON Track Radius Being Used Optional Hookup LOW Headroom Trolley Positioning Chart forLOW Headroom Trolley 15-18Operation HOW the Light Works and What IT Means When IT FlashesRead and Follow ALL Instructions Door activationOperating the Wireless Wall Station Up/Down Button Customizing the SettingsOpener Controls Teaching HomeLink to the opener Primary Programming for HomeLink to the ProdriveProgramming/Training HomeLink Unit Alternate Programming for HomeLink to the Prodrive Adjustment # 1 Opening and Closing Force AdjustmentsClosing Force Adjustment Opening Force AdjustmentTransmitter Tools Needed NoneWall Station Large ButtonTwice a Year MaintenanceBattery Replacement for Wall Station Symptom Probable Cause Corrective Action  TroubleshootingMAINTENANCE/ Troubleshooting Description # Per Unit Parts Breakdown Rail Assembly All Models2524 Parts Breakdown Opener Assembly And Accessories All Models80ft gauge, 2 conductor polarized. UL listed CL-2, 75deg. C Prodrive AccessoriesWireless Keyless Entry Drill Template Pre-drill 3/32 pilot holePre-drill 5/64 pilot hole Multifunction ButtonThank you for your purchase Please Do Not Return This Product To The StoreReplacement labor Lifetime Limited WarrantyFCC and IC Statement Patent InformationPieza nro ¡AVISO ImportanteContenido del paquete Page Prueba uno de la puerta Antes de la instalaciónPrueba dos de la puerta Costado derecho del accionadorHerramientas necesarias Características del sistemaLeer Y Seguir Todas LAS Instrucciones DE Instalación Tabla de materiasTransmisión Montaje del accionador en el rielInstalación Frontal Del garajePuerta Travesaño y cerrar la puertaPosicionamiento del extremo Motor del accionador Fijar la unidad en el soporte De pared frontalDel accionador Montaje del extremoOperación Montaje de soporte de puertaInstalación de iluminación Apropiado Para LA PuertaDE Garaje LA Estación DE Pared Fuera DELCausar EL Malfuncionamiento DEL Accionador Apropiado CON EL InterruptorLA Puerta DE Garaje Etiqueta de advertencia Instalación de la estaciónSobre aprisionamiento Adhesivo no funcionaInstalación de sensor infrarrojo De seguridad, cableadoHerramientas necesarias ArandelaSeguridad cableado al accionador Instalación de cableadoConexión del sensor infrarrojo de Al tomacorriente Conexión del accionadorConexión del trole al Conjunto del pestilloLesiones Personales Alineación de los sensoresDesplace Hasta LA Posición Completamente CerradaMóvil DE LA Puerta Configuración de la posiciónCerrada del trole Para puerta a puerta Conexión de brazoModelos 9700 y 10 aDe cierre de la puerta Calibración de recorridoCalibración del recorrido De apertura de la puertaPerno de tope Trole Accionador Por contacto Prueba de obstrucciónPrueba de obstrucción Del sensor de seguridad Causar Lesiones Graves O FatalesInalámbrico sin llave Programación del accesoHerramientas Posibles Lesiones PersonalesUbicación de cada tornillo Instalación del accesoGaraje En otros materialesIlustradas Conexión eléctrica opción de Cableado permanenteInstalaciones Opcionales Montaje de soporte de puerta Una puerta SerieTaladro eléctrico Vástago de cubo De 7/16˝ Para LA Sección Superior CON Barra UContinuar con el Paso Montaje del soporte de puerta a unaMordazas de PresiónDel brazo de la puerta De cierre del trole / ConexiónConexión Opcional Franqueo Superior ReducidoCierre del trole / Conexión del Configuración de la posición deEl trole y reinstalar la chaveta hendida En la páginaParte inferior CON Franqueo Superior ReducidoDel accionador Riel con franqueo Superior reducido Brazo curvoJamás Ubicarse Bajo UNA Puerta PARADA, Parcialmente Abierta Leer Y Seguir Todas LAS InstruccionesActivación de la puerta Cómo Funciona LA LUZ Y QUÉ Significa Cuando DestellaOperación de la estación inalámbrica de pared Controles del accionador Personalización de la configuraciónPosición personalizada para mascotas Comenzar con la puerta en la posición cerradaProgramación primaria de HomeLink para Prodrive Programación alternativa de HomeLink para Prodrive Ajuste DE LA Fuerza DE Apertura AjustesAjuste DE LA Fuerza DE Cierre Estación DE Pared TransmisorTransmisor Cambio de pilas para la estación de pared MantenimientoDos veces al año Síntoma Causa Probable Acción Correctiva  Diagnóstico y resolución de problemasMantenimiento / Diagnóstico Y Resolución DE Problemas Nro Descripción Unidad Pieza Nro. porNro. por unidad 309960 Conjunto de pestillo para cadena 18b 325687Juego de sensor infrarrojo de seguridad Transitorias MOV 252993 Interruptor de límites 311365Cordón de suministro eléctrico Acceso inalámbrico sin llave de 5 botonesDe operación a radiofrecuencia Accesorios del ProdrivePara instalación en pared Acceso inalámbricoPlantilla DE Perforación Pre-drill 5/64 pilot holePlantilla recortable para ayudar en la instalación Pre-drill 3/32 pilot holeGracias por su compra Cualquier pregunta y/o enviarán cualquier pieza necesariaGarantía Limitada DE POR Vida Información normativa de la FCC Información sobre patentesDeclaración de la FCC e IC

3324B-Z specifications

Wayne-Dalton is renowned for its commitment to innovative door solutions, and the Wayne-Dalton 3324B-Z is a prime example of their cutting-edge offerings in the realm of garage doors. This model is designed for residential settings, combining aesthetics with functionality.

One of the standout features of the 3324B-Z is its construction. The door is made from high-quality steel, ensuring exceptional durability and resistance to external elements. This steel is reinforced to provide strength and support, which is critical for maintaining the stability of the door over time. Moreover, the door is insulated with polyurethane, offering enhanced thermal efficiency. This insulation not only helps to regulate temperature within the garage but also contributes to energy savings by reducing heating and cooling costs.

Aesthetic appeal is another hallmark of the Wayne-Dalton 3324B-Z. Featuring a contemporary design, it is available in multiple color options and finishes, allowing homeowners to customize the look of their home while enhancing curb appeal. The door's design includes raised panel sections that add depth and texture, making it visually appealing without compromising on functionality.

In terms of technology, the Wayne-Dalton 3324B-Z integrates various advancements to enhance user experience and safety. It is equipped with a reliable spring system that promotes smooth operation and extends the lifespan of the door. The door can also be paired with Wayne-Dalton's innovative Quantum garage door opener, which features advanced security and remote access capabilities, allowing homeowners to operate their doors from anywhere via a smartphone app.

Safety is a paramount consideration in the design of the 3324B-Z. The door incorporates features such as pinch-resistant design, reinforced hinges, and safety sensors to protect users and pets from potential accidents during operation.

Installation and maintenance are also simplified with the Wayne-Dalton 3324B-Z. The door comes with detailed instructions for easy setup, and its durable materials require minimal upkeep, ensuring a long-lasting performance with minimal hassle.

In conclusion, the Wayne-Dalton 3324B-Z is a sophisticated choice for any homeowner seeking a balance of style, durability, and advanced technology. Its robust construction, attractive design, and safety features make it an ideal addition to modern homes. Whether upgrading an existing garage door or installing a new one, the 3324B-Z is a solution that stands out in functionality and aesthetics.
Top Page Image Contents