Operation
2. Cooling Only Model with Remote Control and Touch Type
DISPLAY
WG2405RY6, WG2405RY6
2 | 3 |
8
6
1
4 5 7
REMOTE CONTROL
WG2405RY6
WG2405RY6
Power
1
Temp
5
Fan Speed
4
Timer Mode
3 
2
Energy Auto
Saver Swing
6 
7
PRECAUTION: The Remote Control unit will not
function properly if bright light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
POWER BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
OPERATION MODE SELECTION BUTTON
Select Cooling, or Fan or Dehumid mode with button. (Dehumid mode is not to all models.)
ON/OFF TIMER BUTTON
Set the time of starting and stopping operation. The timer is set by 1 hour.
FAN SPEED SELECTOR
Select the fan speed in three steps.
- High [F3] ➔ Low[F1] ➔ Med[F2] ➔ High[F3]... .
ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 60°F to 86°F by 1°F.
6ENERGY SAVER(Available In some models) The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
7AUTO SWING BUTTON
Control the horizontal air direcion by air swing system.
AUTO RESTART
In case the power comes on again after a power failure, the unit runs as previous setting operation.(Available in some models)
Service Manual 14