LG Electronics WG2405RY6, WG1805RY6, RAD-183A, RAD-243A service manual Installation

		Installation
5.	Pull each Frame curtain fully to each window sash
	track, and pull the bottom window sash down behind
	the Top retainer bar until it meets.	Screw(Type C)
6.	Attach each Frame curtain the window sash by using
	screws (Type C.) (See Fig. 11)
7.	Slide the unit into the cabinet.(See Fig. 12)	Figure 11

CAUTION: For security purpose, rein- stall screws(Type A) at cabinet's sides.

8.Cut the Foam-strip to the proper length and insert between the upper window sash and the lower win- dow sash.(See Fig. 13)

Power Cord

Screw Screw (Type A)

Figure 12

Foam-Strip

Figure 13

9.Attach the Window locking bracket with a screw (Type C.) (See Fig. 14)

Window locking bracket

Figure 14

10.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place.(See Fig.15)

11.Lift the inlet grille and secure it with a screw (Type A) through the front grille.(See Fig. 15)

Figure 15

12. Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Figure 16
Service Manual	12