Disassembly
Air Handling
Parts
4. Cover (at the top)
1. Remove the front grille. (Refer to section 17)
2. Remove the cabinet. (Refer to section 18)
3. Remove 11 screws which fasten the brace and covers.
4. Remove the covers and the brace. (See Fig. 20)
5.
Figure 20
5.Blower
1.Remove the cover. (Refer to section 20)
2.Remove the 3 screws which fasten the evaporator at the left side and the top side.
3.Move the evaporator sideward carefully.
4.Remove the orifice from the air guide carefully.
5.Remove the clamp which secures the blower with plier. (See Fig. 21)
6.Remove the blower with plier or your hand without touching blades. (See Fig. 22)
7.
6.Fan
1.Remove the cabinet. (Refer to section 18)
2.Remove the brace and shroud cover. (Refer to section 20)
3.Remove the 5 screws which fasten the condenser.
4.Move the condenser sideways carefully.
5.Remove the clamp which secures the fan.
6.Remove the fan. (See Figure 23)
7.
Figure 21
Figure 22
Figure 23
Service Manual 16