Janome 1100D manual Overcast, Select 5 and set up the machine, Select 6 and set up the machine

5	1.0		2.0	1
NO.		DF	SL	L	R

5

6	1.0	2.0	NA
NO.	DF	SL	L R

6

OVERCAST 2

Select 5 and set up the machine.

The needle and lower looper threads form an edge finish that is lightweight and flat.

Common Uses

•Finish an open seam edge on lightweight fabrics.

Thread in the following sequence:

1Green thread path for lower looper

2Yellow-1 thread path for L needle

(See pages 44-45 for detailed threading route.)

FLATLOCK 2

Select 6 and set up the machine.

The needle and lower looper threads form a stitch that can be pulled flat.

Fold the fabric with the wrong side together and stitch along the folded edge. After stitching, open and pull the fabric flat.

Common Uses

•Garment construction on undergarments.

•Hemming technique.

Thread in the following sequence:

1Green thread path for lower looper

2Yellow-1 thread path for L needle

(See pages 44-45 for detailed threading route.)

NOTE:

Adjust the stitch width by turning the cutting width dial as necessary (see page 26).

36