Fostex CR300 owner manual Switching the time display

Page 13

DISPLAY PANEL

Lights when automatic digital- source synchro recording is activated. (See p. 18 to 20.)

Lights during repeat playback. (See p. 37)

Lights in the program mode. (See p. 38.)

Lights during playback.

Blinks during fade-in/out. (See p. 27 and 37.)

Lights or blinks during pause.

Blinks during disc identification and lights steadily. (See p. 15.)

CD: Lights when a disc is loaded.

CD-R: Lights if the loaded disc is a CD-R disc before finalization.

CD-RW: Lights if the loaded disc is a CD-RW disc

Lights if the loaded disc is a finalized CD-RW disc.

Displays the sampling frequency (Fs) of the current digital input. All indicators are off when the input signal

Not Use

Displays messages. (See p. 41 and p. 42)

is interrupted.

Lights during record mode. Blinks in the record muting mode.

Lights when automatic track number write during recording is activated.

Displays the track No.

Displays the elapsed playing time, remaining playing time, total playing time, elapsed recording time, remaining recording time, total recording time, margine level and remaining time until the end of finalization.

Displays the input level during record or the play level during playback

Lights, goes off or blinks during skip ID setting or clearing. (See p. 29 and p. 30)

The disc contains skip ID data, the SKIP ON indicator lights automatically (See p. 40)

Switching the time display

By pressing either the TIME/MARGIN button on the main unit or the TIME button on the wireless remote controller, the time diaplay contents is switched.

Depending on a condition of loaded disc and CR300, the time display contens will be swtiched as shown below.

• Playing : All discs

A : Elapsed playing/

recording time

A B C1 D E A •••

 

• Recording : CD-R / CD-RW discs

B : Remaining playing time

of track

A C2 D E A •••

C1 : Remaining playing time

 

 

 

 

• Stoping : CD-R (Not Finalized) / CD-RW (Not Finalized)

of all tracks on disc

 

A B C2 D A •••

C2 : Remaining recording

 

 

 

 

• Stoping : CD / CD-R(Finalized) / CD-RW(Finalized)

time on disc

 

A B C1 D A •••

D : Total playing/recording

 

 

 

 

time

TIME

 

 

E : Margin indicator

 

 

 

 

 

 

/MARGIN

 

 

 

 

 

 

 

 

 

13

CR300 <PRB1291-B>

Image 13
Contents CR300 Safety Instructions For Canadian model Information to UserPour le modele Canadien Features Contents AC power cord AAA/R03 dry cell batteries ... x Checking AccessoriesBattery loading method Batteries AAA/R03 dry cell batteriesCleaning the compact disc recorder Precautions regarding installationCD lens cleaner LocationDiscs usable with this unit DiscsCD-R finalization CD-R and CD-RW discsHandling of disc Disc maintenanceDo not play a CD with a special shape Disc storageConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Parallel remote control Wireless remote controlAlso be carried out by using buttons with the same Operations performed by buttons marked canDisc LOADING/UNLOADING Turn the power on2,4 Open the disc trayTrack numbers are updated automatically by this unit Mode of RecordingRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording Load a CD-R or CD All-track recordingRW disc containing Recordable space Synchro button twice Automatic finalization recordingPress the Finalize ButtonPress the Record REC buttons Manual DIGITAL-SOURCE RecordingAfter recording, press the stop button to end recording Adjust the recording level Press the pause Or play button Record-pause modeANALOG-SOURCE Recording RW disc containing a Recordable spaceAdjustment reference Recording level adjustmentLevel meter Minimum recording time per trackAuto stop delay time Setting in Digital Synchro Copy Bit SettingFade In / Fade Out Time Setting Menu Button FunctionsAuto Pause Mode Setting Automatic Track Number Renewal Level Sensitivity SettingBalanced Output Level Setting Sample Rate Converter ThruManual writing of track number Track Number WritingAutomatic writing of track number Press the Track no T O / M a N U a LTo pause recording Convenient Functions for RecordingCreating a blank Starting recording with fade-inChecking the recording end point from the middle of a disc Skip ID Recording Setting skip ID to a track Track skipPlay the track to be skipped Press the Skip ID SET buttonPlay the track which is not to be skipped Clearing skip ID of a trackFinalization TOC Recording What is finalization?RW disc which has Been recorded on Press the Finalize buttonErasing CD-RW discs Erasing CD-RW onlyPress the Erase button Load a CD-RW disc w h i c h h a s b e e n recorded onLoad a CD-RW disc which has been finalized Press the pause button to start the TOC erasingAll tracks erasing Starting playback PlaybackTo pause playback Playing from the desired track Direct track selectionSearching the desired point Manual search Searching an adjacent track Track searchPress the track search Press and hold the manualPress the Repeat button of the remote control unit Playback in Auto Pause ModePlaying tracks repeatedly Repeat playback Fade-in/fade-out during playbackPlaying Tracks in the Desired Order Programmed PlaybackProgram reservation Programming pauseClearing a track from the program Clearing the entire programChecking the programmed tracks Replacing a track in the programPress the play button Load a disc containing the recording of skip ID dataCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO