Fostex CR300 owner manual Menu Button Functions, Copy Bit Setting, Fade In / Fade Out Time Setting

Page 24

MENU BUTTON FUNCTIONS

By pressing the MENU button while the CR300 is in STOP mode, operation of various functions can be selected as shown below. Pressing the MENU but- ton every time would allows you to se- lect a different MENU.

SET MENU

1 Select a desired MENU by pressing the MENU button.

•Pressing the MENU button every time would allow you to select a different setup MENU.

•The current setup MENU condition is displayed.

MENU

2 By pressing either the

or

button, the setting is altered.

3 Pressing the Skip ID SET button would register the above condition.

SKIP ID

SETCLEAR

A. Copy Bit Setting

This menu selects the Copy Bit condition recorded onto a disk. (Refer to page 18, 19, 20, 21, 22)

•Copy bit indicator: It indicates the Copy Bit condition while in the Record-Pause mode.

Display

Meaning

Hereafter, unlimited digital copy is possible. default Hereafter, digital copy is possible only once. Hereafter, digital copy is prohibited.

Copy bit indicator Copy Bit

Lit solid

1

Off0

Blinking 1/0

B. Auto stop delay time Setting in Digital Synchro

In this menu, length of no signal(less than -90dB) recorded section can be selected in order to stop Digital Synchro recording automatically. (Refer to page 18, 19, 20)

Display

Meaning

0 sec default

10 sec

Digital Synchro recording cannot be stopped automatically.

C. Fade In / Fade Out Time Setting

This menu allows to select the Fade in/Fade out time. (Refer to page 27, 37)

DisplayMeaning

Fade time : 6 sec default

Fade time : 9 sec

Fade time : 12 sec

Fade time : 18 sec

24

CR300 <PRB1291-A>

Image 24

Contents CR300 Safety Instructions Information to User For Canadian modelPour le modele Canadien Features Contents Checking Accessories AC power cord AAA/R03 dry cell batteries ... xBattery loading method Batteries AAA/R03 dry cell batteriesPrecautions regarding installation Cleaning the compact disc recorderCD lens cleaner LocationDiscs Discs usable with this unitCD-R finalization CD-R and CD-RW discsDisc maintenance Handling of discDo not play a CD with a special shape Disc storageDigital Signal Connection ConnectionsAnalog Signal Connection Controls and Indicators Switching the time display Wireless remote control Parallel remote controlAlso be carried out by using buttons with the same Operations performed by buttons marked canTurn the power on Disc LOADING/UNLOADING2,4 Open the disc trayMode of Recording Track numbers are updated automatically by this unitRecording a CD, DAT, MD or DCC source S/P DIF only Recording of other-than-audio signals Recording from the middle of a discTrack recording All-track recording Load a CD-R or CDRW disc containing Recordable space Automatic finalization recording Synchro button twicePress the Finalize ButtonManual DIGITAL-SOURCE Recording Press the Record REC buttonsAfter recording, press the stop button to end recording Press the pause Or play button Record-pause mode Adjust the recording levelANALOG-SOURCE Recording RW disc containing a Recordable spaceRecording level adjustment Adjustment referenceLevel meter Minimum recording time per trackCopy Bit Setting Auto stop delay time Setting in Digital SynchroFade In / Fade Out Time Setting Menu Button FunctionsAutomatic Track Number Renewal Level Sensitivity Setting Auto Pause Mode SettingBalanced Output Level Setting Sample Rate Converter ThruTrack Number Writing Manual writing of track numberAutomatic writing of track number Press the Track no T O / M a N U a LConvenient Functions for Recording To pause recordingCreating a blank Starting recording with fade-inChecking the recording end point from the middle of a disc Setting skip ID to a track Track skip Skip ID RecordingPlay the track to be skipped Press the Skip ID SET buttonClearing skip ID of a track Play the track which is not to be skippedWhat is finalization? Finalization TOC RecordingRW disc which has Been recorded on Press the Finalize buttonErasing CD-RW only Erasing CD-RW discsLoad a CD-RW disc w h i c h h a s b e e n recorded on Press the Erase buttonLoad a CD-RW disc which has been finalized Press the pause button to start the TOC erasingAll tracks erasing Playback Starting playbackTo pause playback Playing from the desired track Direct track selectionSearching an adjacent track Track search Searching the desired point Manual searchPress the track search Press and hold the manualPlayback in Auto Pause Mode Press the Repeat button of the remote control unitPlaying tracks repeatedly Repeat playback Fade-in/fade-out during playbackProgrammed Playback Playing Tracks in the Desired OrderProgram reservation Programming pauseClearing the entire program Clearing a track from the programChecking the programmed tracks Replacing a track in the programLoad a disc containing the recording of skip ID data Press the play buttonCase skip playback is not required Character Message List Message Description Ref.Information messages related to recording operation Information messages related to playback operationSymptom Cause Remedy ConnectionsIndex Term Function Ref.Audio Unit typical Declaration of EC Directive Affect of Immunity on This EquipmentPage Fostex CO