SKIP ID RECORDING
By setting track skip IDs to the tracks which failed or which consist of a blank, they can be skipped when the disc is played later.
CAUTION:
Skip IDs can be set or cleared for up to a total of 21 tracks.
If skip IDs are set or cleared repeatedly, the number of tracks to which track skip IDs will decrease.
Skip IDs cannot be set or cleared with CD discs or finalized CD- R,
•Skip playback is not possible with an ordinary CD player which does not incorporate the skip function.
2,35
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SKIP |
| ID CLEAR |
|
| 1 | |
|
| |||||
REC
TRACK NO.
FADER WREITE
REPEAT
1 2 3
4 5 6
7 8 9
10 
10 TIME
A. Setting skip ID to a track (Track skip)
•If skip IDs have already been set, the SKIP indicator lights on the display.
Lights. |
| ||
• When the track search button ( |
|
| or |
| |||
) is pressed while "SKIP" and "SET?" are displayed, tracks to which the skip IDs are not set will be played in order of track numbers.
•The selected tracks play back repeatedly.
•When the play ( 
) button or SKIP ID CLEAR button is pressed during the setting operation, the setting mode is canceled.
•When an attempt is made to set or clear more skip IDs than possible, "FULL" is displayed and no more recording is possible.
•When the button is pressed to remove the disc, the skip ID setting data is recorded on the disc. At this time, and blinks "OPEN" is displayed for a few seconds, and the tray opens after the skip ID setting data has been recorded.
1 Play the track to be skipped.
Select it with the numeric but- tons of the remote control unit or a track search button .
2 Press the SKIP ID SET button.
"SKIP" and "SET?" are displayed alternately.
3 To set the skip ID, press the SKIP ID SET button again.
4 Skip IDs can be set to other tracks by repeating steps 1 to 3 for each of them.
5 After having set the required skip IDs, p r e s s t h e O P E N / CLOSE button.
29
CR300