Fostex CR300 Automatic Track Number Renewal Level Sensitivity Setting, Auto Pause Mode Setting

Page 25

D. Automatic Track Number Renewal Level Sensitivity Setting

This menu selects the analog source input level sensitivity for automatic track number renewal. (Refer to page 22, 26)

Display

Meaning

-60dB default

-54dB

-48dB

-42dB

-38dB

-66dB

E. Auto Pause Mode Setting

This menu allows to select whether the AUTO PAUSE PLAY mode is turned on or off. (Refer to page 37)

Display	Meaning
	The AUTO PAUSE PLAY mode is turned off. default
	The AUTO PAUSE PLAY mode is turned on.
	As shown in the drawing below, when the AUTO PAUSE mode is on,
	the letter “P” is displayed.
	Note : If the power is once turned off and on again, this mode will become Off condition.

F. Balanced Output Level Setting

This menu selects the standard level of Balanced Output. (Refer to page 11)

DisplayMeaning

+4dBu default

-10dBV

G. Wireless Remote Control

This menu selects whether the CR300 is controlled by a wireless remote controller or not. (Refer to page 14)

Display

Meaning

The CR300 can be controlled by a wireless remote controller. default

The CR300 cannot be controlled by a wireless remote controller.

H. Sample Rate Converter Thru

This menu selects whether the 44.1kHz digital signal is input through the SRC(Sample Rate Converter) or not. (Refer to page 10)

Display

Meaning

The input signal passes through the SRC. default

The input signal goes around the SRC.

Note : If the power is once turned off and on again, this mode will become Off condition.

I. Digital Out

This menu selects whether a signal is output from Digital Out terminal. (Refer to page 10)

Display

Meaning

A signal is output from Digital Out terminal. default

A signal is not output from Digital Out terminal.

25

CR300 <PRB1291-A>

Image 25

Contents CR300 Safety Instructions For Canadian model Information to UserPour le modele Canadien Features Contents AC power cord AAA/R03 dry cell batteries ... x Checking AccessoriesBattery loading method Batteries AAA/R03 dry cell batteriesCleaning the compact disc recorder Precautions regarding installationCD lens cleaner LocationDiscs usable with this unit DiscsCD-R finalization CD-R and CD-RW discsHandling of disc Disc maintenanceDo not play a CD with a special shape Disc storageConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Parallel remote control Wireless remote controlAlso be carried out by using buttons with the same Operations performed by buttons marked canDisc LOADING/UNLOADING Turn the power on2,4 Open the disc trayTrack numbers are updated automatically by this unit Mode of RecordingRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording Load a CD-R or CD All-track recordingRW disc containing Recordable space Synchro button twice Automatic finalization recordingPress the Finalize ButtonPress the Record REC buttons Manual DIGITAL-SOURCE RecordingAfter recording, press the stop button to end recording Adjust the recording level Press the pause Or play button Record-pause modeANALOG-SOURCE Recording RW disc containing a Recordable spaceAdjustment reference Recording level adjustmentLevel meter Minimum recording time per trackAuto stop delay time Setting in Digital Synchro Copy Bit SettingFade In / Fade Out Time Setting Menu Button FunctionsAuto Pause Mode Setting Automatic Track Number Renewal Level Sensitivity SettingBalanced Output Level Setting Sample Rate Converter ThruManual writing of track number Track Number WritingAutomatic writing of track number Press the Track no T O / M a N U a LTo pause recording Convenient Functions for RecordingCreating a blank Starting recording with fade-inChecking the recording end point from the middle of a disc Skip ID Recording Setting skip ID to a track Track skipPlay the track to be skipped Press the Skip ID SET buttonPlay the track which is not to be skipped Clearing skip ID of a trackFinalization TOC Recording What is finalization?RW disc which has Been recorded on Press the Finalize buttonErasing CD-RW discs Erasing CD-RW onlyPress the Erase button Load a CD-RW disc w h i c h h a s b e e n recorded onLoad a CD-RW disc which has been finalized Press the pause button to start the TOC erasingAll tracks erasing Starting playback PlaybackTo pause playback Playing from the desired track Direct track selectionSearching the desired point Manual search Searching an adjacent track Track searchPress the track search Press and hold the manualPress the Repeat button of the remote control unit Playback in Auto Pause ModePlaying tracks repeatedly Repeat playback Fade-in/fade-out during playbackPlaying Tracks in the Desired Order Programmed PlaybackProgram reservation Programming pauseClearing a track from the program Clearing the entire programChecking the programmed tracks Replacing a track in the programPress the play button Load a disc containing the recording of skip ID dataCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO