Fostex CR300 Finalization TOC Recording, What is finalization?, Press the Finalize button

Page 31

FINALIZATION (TOC RECORDING)

What is finalization?

•Finalization is the final process in recording a CD-R or CD-RW disc that is playable on standard CD players. (However, CD-RW discs, whether finalized or not, can only be played back on a CD-RW disc player.)

•Once a disc is finalized, neither recording nor skip ID setting/clearing is possible on the disc; be very careful.

•Never cut the power supply during finalization, for this may lead to disc damage.

2

•Ensure that there is no scratch, dust or stain on the disc.

If the disc is dusty or stained, clean it by referring to "Disc maintenance" on page 9.

•If finalization is not required, press the

stop ( ) button; finalization will be aborted.

•The procedure is canceled automatically when the unit has remained in record-pause mode for about 10 minutes or more.

•The remaining time until the completion of finalization is displayed during finalization.

1

 

REC

FADER

TRACK NO.

WREITE

REPEAT

 

3

 

Finalization procedure

 

1 Load a CD-R or CD-

Label side

RW disc which has

 

been recorded on.

 

For a disc loading, refer to page 15.

2 Press the FINALIZE button.

The unit enters record-pause

• The displayed time varies

mode.

depending on discs.

• Wait until the time information is displayed.

3 Press the pause ( ) button.

Finalization starts now.

•It usually takes about 4 minutes until the finalization completes.

•When the CD-R finalization is completed normally, the CD-R indicator changes to the CD indicator, and the unit enters stop mode automatically.

•When the CD-RW finalization is completed normally, the FINALIZE indicator lights and the unit enters stop mode automatically.

CAUTION:

•Once finalization is started, no operation button is accepted until the finalization completes.

•If a scratched, stained or dusty disc is subjected to finalization, the finalization may sometimes not complete.

In case finalization does not complete in about 10 minutes from the start, it can be forced to be aborted by pressing the stop ( ) button. But such a disc cannot be played on ordinary CD players.

•Never unplug the power cord during finalization.

If the power supply is interrupted due to power failure or by mistake during finalization, the remaining finalization resumes as soon as the power supply is recovered. In this case "RESUME" is displayed until the finalization is completed. Note that the disc finalization may not resume properly in some cases.

31

CR300 <PRB1291-A>

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CR300 Safety Instructions For Canadian model Information to UserPour le modele Canadien Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading methodLocation Precautions regarding installationCleaning the compact disc recorder CD lens cleanerCD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalizationDisc storage Disc maintenanceHandling of disc Do not play a CD with a special shapeConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the sameOpen the disc tray Turn the power onDisc LOADING/UNLOADING 2,4Track numbers are updated automatically by this unit Mode of RecordingRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording Load a CD-R or CD All-track recordingRW disc containing Recordable space Button Automatic finalization recordingSynchro button twice Press the FinalizePress the Record REC buttons Manual DIGITAL-SOURCE RecordingAfter recording, press the stop button to end recording RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE RecordingMinimum recording time per track Recording level adjustmentAdjustment reference Level meterMenu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time SettingSample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level SettingPress the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track numberStarting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blankChecking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skippedPlay the track which is not to be skipped Clearing skip ID of a trackPress the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded onErasing CD-RW discs Erasing CD-RW onlyPress the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalizedAll tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playbackPress and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track searchFade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playbackProgramming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservationReplacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracksPress the play button Load a disc containing the recording of skip ID dataCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO
Top Page Image Contents