Fostex CR300 owner manual Information to User, For Canadian model, Pour le modele Canadien

Page 3

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

The use of optical instruments with this product will increase eye hazard.

CAUTION:

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

[For Canadian model]

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such a way that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord regularly. When you find it damaged, ask your nearest FOSTEX authorized service station or your dealer for a replacement.

[Pour le modele Canadien]

Cet appareil numerique de la Classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

 

 

 

 

IC

IN

D

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

O

 

 

S

 

 

 

 

 

 

R

 

 

 

 

U

 

 

 

 

 

T

 

 

 

 

 

 

 

 

 

C

 

 

 

 

T

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

 

E

 

 

 

 

 

 

 

E

 

 

 

L

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

S

 

 

 

A

EST

1924

 

 

 

 

 

 

 

 

 

ION

 

 

 

 

 

 

S

 

 

 

 

 

 

 

 

 

S O C IAT

 

 

We

 

 

 

 

 

 

 

 

 

 

Want You

 

LISTENING

For A Lifetime

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection.

Decibel

Level Example

30 Quiet library, soft whispers

40Living room, refrigerator, bedroom away from traffic

50Light traffic, normal conversation, quiet office

60Air conditioner at 20 feet, sewing machine

70Vacuum cleaner, hair dryer, noisy restaurant

80Average city traffic, garbage disposals, alarm clock at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90Subway, motorcycle, truck traffic, lawn mower

100Garbage truck, chain saw, pneumatic drill

120Rock band concert in front of speakers, thunderclap

140Gunshot blast, jet plane

180Rocket launching pad

Information courtesy of the Deafness Research Foundation.

 

 

 

 

IC

IN

D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

 

 

O

 

 

 

S

 

 

 

 

 

 

 

T

R

 

 

 

 

U

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

T

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

E

 

 

 

 

 

 

 

E

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

S

 

 

 

 

 

 

EST

1924

 

We

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

SS

 

 

ION

 

Want You

 

 

 

 

O C IAT

 

 

LISTENING

For A Lifetime

Image 3
Contents CR300 Safety Instructions Information to User For Canadian modelPour le modele Canadien Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading methodLocation Precautions regarding installationCleaning the compact disc recorder CD lens cleanerCD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalizationDisc storage Disc maintenanceHandling of disc Do not play a CD with a special shapeConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the sameOpen the disc tray Turn the power onDisc LOADING/UNLOADING 2,4Mode of Recording Track numbers are updated automatically by this unitRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording All-track recording Load a CD-R or CDRW disc containing Recordable space Button Automatic finalization recordingSynchro button twice Press the FinalizeManual DIGITAL-SOURCE Recording Press the Record REC buttonsAfter recording, press the stop button to end recording RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE RecordingMinimum recording time per track Recording level adjustmentAdjustment reference Level meterMenu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time SettingSample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level SettingPress the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track numberStarting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blankChecking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skippedPlay the track which is not to be skipped Clearing skip ID of a trackPress the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded onErasing CD-RW discs Erasing CD-RW onlyPress the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalizedAll tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playbackPress and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track searchFade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playbackProgramming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservationReplacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracksLoad a disc containing the recording of skip ID data Press the play buttonCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO