Fostex CR300 owner manual Disc LOADING/UNLOADING, 2,4, Turn the power on, Open the disc tray

Page 15

DISC LOADING/UNLOADING

1 3 2,4

Function indicator

A. OPEN THE DISC TRAY

1 Turn the power on.

•After recording or skip information recording, it takes a few seconds before the disc can be unloaded because the recording information is written on the disc. "OPEN" blinks in this period.

•The function indicator will flash green.

•The display panel is illumi- nated.

2 Open the disc tray.

"OPEN" is displayed and the tray comes out.

•Set a disc in the center of the tray with the label side up.

•When loading an 8-cm (3-inch) disc, set the disc in the groove in the very center of the tray.

•Load only one disc at a time.

B. CLOSE THE DISC TRAY (LOADING A DISC)

3	Label side
3	Place a disc.

4 Close the disc tray.

	The disc tray can also be closed by;			"CLOSE" is displayed and the
	The disc tray can also be closed by;			tray is closed.
	• pressing the play (		) button.

• pushing the disc tray lightly.

When a disc is loaded, the disc type is identified and the information on the disc is read out. (In this period, "CD", "CD-R" and "CD-RW" are displayed alternately.)

	Display for a non-recorded	Display for a prerecorded
	CD-R disc:	CD or finalized CD-R disc:
		The total playing time is displayed.

	Display for a non-recorded	Display for a prerecorded
	CD-RW disc:	and finalized CD-RW disc:
		The total playing time is displayed.

	Display for a partially	An attempt is made to start
	Display for a partially	playback without loading a
	recorded CD-R disc:	playback without loading a
	recorded CD-R disc:	disc:
	The total recording time is displayed.	disc:

Display for a partially recorded CD-RW disc:

The total recording time is displayed.

15

CR300 <PRB1291-A>

Image 15

Contents CR300 Safety Instructions Information to User For Canadian modelPour le modele Canadien Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading methodLocation Precautions regarding installationCleaning the compact disc recorder CD lens cleanerCD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalizationDisc storage Disc maintenanceHandling of disc Do not play a CD with a special shapeConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the sameOpen the disc tray Turn the power onDisc LOADING/UNLOADING 2,4Mode of Recording Track numbers are updated automatically by this unitRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording All-track recording Load a CD-R or CDRW disc containing Recordable space Button Automatic finalization recordingSynchro button twice Press the FinalizeManual DIGITAL-SOURCE Recording Press the Record REC buttonsAfter recording, press the stop button to end recording RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE RecordingMinimum recording time per track Recording level adjustmentAdjustment reference Level meterMenu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time SettingSample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level SettingPress the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track numberStarting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blankChecking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skippedPlay the track which is not to be skipped Clearing skip ID of a trackPress the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded onErasing CD-RW discs Erasing CD-RW onlyPress the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalizedAll tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playbackPress and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track searchFade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playbackProgramming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservationReplacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracksLoad a disc containing the recording of skip ID data Press the play buttonCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO