Fostex CR300 owner manual Erasing CD-RW only, Erasing CD-RW discs

Page 32

ERASING (CD-RW ONLY)

Erasing CD-RW discs

CD-RW discs can be erased and new recordings can be made where data has been erased. The following types of erasing are provided.

A Last Track Erasing:

Erases the last track. This operation is not possible on a CD-RW disc that has been finalized.

B. All Tracks Erasing:

Erases all tracks.

C. TOC Erasing:

The TOC data on the finalized disc is erased.

D. All Disc Erasing:

This operation deletes all data on the disc.

This operation is mainly performed to enable disc recovery and is not normally performed.

CAUTION:

•The power must not be turned off during erasing since this could destroy the disc.

If a power outage occurs during erasing or you should inadvertently turn off the power during eras- ing, turn on the power when it comes back on again. The erase operation is then automatically restarted and takes 3 minutes for All tracks erasing and maximum recording time plus 5 minutes for Disc erasing. However, there is no guarantee that the disc will be erased normally. The erase opera- tion that is restarted when the power comes back can be stopped by pressing the stop ( ) button for 10 seconds. If this erase operation is stopped, the message "CHECK", "DISC" appears to indicate that the disc has not been normally erased.

•If the message "CHECK", "DISC" appears during erasing and erasing stops, the disc may be dam- aged.

Should this happen, eject the disc and check it. Then try erasing it again.

•Be sure to remove the disc after the erase operation and before turning off the power.

If the power is turned off with the disc still in the recorder, the backup data is deleted and the erase operation is cancelled.

32

CR300 <PRB1291-A>

Image 32

Contents CR300 Safety Instructions Pour le modele Canadien Information to UserFor Canadian model Features Contents Checking Accessories AC power cord AAA/R03 dry cell batteries ... xBattery loading method Batteries AAA/R03 dry cell batteriesPrecautions regarding installation Cleaning the compact disc recorderCD lens cleaner LocationDiscs Discs usable with this unitCD-R finalization CD-R and CD-RW discsDisc maintenance Handling of discDo not play a CD with a special shape Disc storageDigital Signal Connection ConnectionsAnalog Signal Connection Controls and Indicators Switching the time display Wireless remote control Parallel remote controlAlso be carried out by using buttons with the same Operations performed by buttons marked canTurn the power on Disc LOADING/UNLOADING2,4 Open the disc trayRecording a CD, DAT, MD or DCC source S/P DIF only Mode of RecordingTrack numbers are updated automatically by this unit Recording of other-than-audio signals Recording from the middle of a discTrack recording RW disc containing Recordable space All-track recordingLoad a CD-R or CD Automatic finalization recording Synchro button twicePress the Finalize ButtonAfter recording, press the stop button to end recording Manual DIGITAL-SOURCE RecordingPress the Record REC buttons Press the pause Or play button Record-pause mode Adjust the recording levelANALOG-SOURCE Recording RW disc containing a Recordable spaceRecording level adjustment Adjustment referenceLevel meter Minimum recording time per trackCopy Bit Setting Auto stop delay time Setting in Digital SynchroFade In / Fade Out Time Setting Menu Button FunctionsAutomatic Track Number Renewal Level Sensitivity Setting Auto Pause Mode SettingBalanced Output Level Setting Sample Rate Converter ThruTrack Number Writing Manual writing of track numberAutomatic writing of track number Press the Track no T O / M a N U a LConvenient Functions for Recording To pause recordingCreating a blank Starting recording with fade-inChecking the recording end point from the middle of a disc Setting skip ID to a track Track skip Skip ID RecordingPlay the track to be skipped Press the Skip ID SET buttonClearing skip ID of a track Play the track which is not to be skippedWhat is finalization? Finalization TOC RecordingRW disc which has Been recorded on Press the Finalize buttonErasing CD-RW only Erasing CD-RW discsLoad a CD-RW disc w h i c h h a s b e e n recorded on Press the Erase buttonLoad a CD-RW disc which has been finalized Press the pause button to start the TOC erasingAll tracks erasing Playback Starting playbackTo pause playback Playing from the desired track Direct track selectionSearching an adjacent track Track search Searching the desired point Manual searchPress the track search Press and hold the manualPlayback in Auto Pause Mode Press the Repeat button of the remote control unitPlaying tracks repeatedly Repeat playback Fade-in/fade-out during playbackProgrammed Playback Playing Tracks in the Desired OrderProgram reservation Programming pauseClearing the entire program Clearing a track from the programChecking the programmed tracks Replacing a track in the programCase skip playback is not required Load a disc containing the recording of skip ID dataPress the play button Character Message List Message Description Ref.Information messages related to recording operation Information messages related to playback operationSymptom Cause Remedy ConnectionsIndex Term Function Ref.Audio Unit typical Declaration of EC Directive Affect of Immunity on This EquipmentPage Fostex CO