Fostex CR300 owner manual Symptom Cause Remedy, Connections

Page 43

TROUBLESHOOTING

Symptom

Cause

Remedy

Power cannot be turned on.

The power cord is unplugged from the power outlet.

Plug the power cord into a power outlet.

The power was turned off from the component

Turn on the component into which the power

(stereo amplifier, audio time, etc.) to which it is

cord is connected.

connected.

Playback is impossible.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNECTIONS".

Recording is impossible.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNOTATIONS".

The CD-R or CD-RW disc in use has been

Use a non-finalized disc.

finalized.

Erase a CD-RW disc.

The input selection is incorrect.

Select the input connected to the desired

source.

The REC LEVEL control is set too low.

Increase the recording level to an optimum level.

Recorded sound is distorted.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNECTIONS".

There is interference from a TV set.

Turn the TV power off or install this unit apart

from the TV.

The disc is damaged or warped.

Use another disc.

The recording level is set too high.

Decrease the recording level.

The disc is extremely dirty.

Clean the disc.

Remote control operation

The remote control batteries are exhausted.

Replace both of the remote control batteries

is impossible.

with new ones.

There is an obstacle between the remote

Remove the obstacle.

control unit and main unit.

The remote control unit is operated outside the

Operate in the remote controllable range.

remote controllable range.

Certain tracks are skipped

The SKIP PLAY button is set to ON.

Set the SKIP PLAY button to OFF.

without being played.

Skip playback does not occur.

The SKIP PLAY button is set to OFF.

Set the SKIP PLAY button to ON.

A recorded CD-R disc

• The disc has not been finalized after

Finalize the disc. (Refer to page 31)

cannot be played on other

recording.

CD players.

• When such a disc is loaded in the unit, the

CD-R indicator lights up. (Refer to page 8.)

43

CR300 <PRB1291-A>

Image 43

Contents CR300 Safety Instructions For Canadian model Information to UserPour le modele Canadien Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading methodLocation Precautions regarding installationCleaning the compact disc recorder CD lens cleanerCD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalizationDisc storage Disc maintenanceHandling of disc Do not play a CD with a special shapeConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the sameOpen the disc tray Turn the power onDisc LOADING/UNLOADING 2,4Track numbers are updated automatically by this unit Mode of RecordingRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording Load a CD-R or CD All-track recordingRW disc containing Recordable space Button Automatic finalization recordingSynchro button twice Press the FinalizePress the Record REC buttons Manual DIGITAL-SOURCE RecordingAfter recording, press the stop button to end recording RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE RecordingMinimum recording time per track Recording level adjustmentAdjustment reference Level meterMenu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time SettingSample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level SettingPress the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track numberStarting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blankChecking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skippedPlay the track which is not to be skipped Clearing skip ID of a trackPress the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded onErasing CD-RW discs Erasing CD-RW onlyPress the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalizedAll tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playbackPress and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track searchFade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playbackProgramming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservationReplacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracksPress the play button Load a disc containing the recording of skip ID dataCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO