Fostex CR300 owner manual Recording level adjustment, Adjustment reference, Level meter

Page 23

Recording level adjustment

• Adjustment reference

For recording of analog input, adjust the recording level so that the OVER-level indicator does not light even when the highest, or peak level is input. Sound may be distorted if the OVER-level indicator lights.

• Level meter

The level meter segments light to indicate the input level during recording or play level during playback.

INPUT SELECTOR

DIGITAL

 

ANALOG

 

XLR/+4

 

COAX

XLR/-10

 

OPT

 

LINE

AESEBU/

 

 

Lights at between –1 dB and below 0 dB.

Each lights when the indicated level is exceeded.

Lights at 0 dB or more.

• Minimum recording time per track

As the CD specifications dictate that each CD track should be no less than 4 seconds, even when the pause ( ) or stop ( ) button is pressed in less than 4 seconds after the start of recording, recording does not pause or stop until a 4-second track is created by leaving a non-recorded blank in the insufficient period.

In this case, the next operation cannot be activated until a 4-second track has been created.

Track number write operation

Ordinary CD-digital audio contains the recording of track numbers so desired tracks can be selected and played. When recording with a CD-R recorder, however, you need to write the track numbers yourself. When recording from digital sources containing track number information (such as a CD, MD, DAT, or DCC), a new track number is recorded automatically when this unit detects a change track number information and sound from the digital source. In case of recording of a source which does not contain track number information such as an analog source or satellite broadcasting (BS), you must write a new track number by yourself between tracks. (Be specially sure not to forget this for it is not possible to add track numbers once recording has completed.)

For the track number write operation procedure, refer to page 26.

C D c o n t a i n s t r a c k n u m b e r information just like a dictionary contains an index.

Dictionary

Index

23

CR300 <PRB1291-A>

Image 23
Contents CR300 Safety Instructions Pour le modele Canadien Information to UserFor Canadian model Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading methodLocation Precautions regarding installationCleaning the compact disc recorder CD lens cleanerCD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalizationDisc storage Disc maintenanceHandling of disc Do not play a CD with a special shapeConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the sameOpen the disc tray Turn the power onDisc LOADING/UNLOADING 2,4Recording a CD, DAT, MD or DCC source S/P DIF only Mode of RecordingTrack numbers are updated automatically by this unit Recording from the middle of a disc Recording of other-than-audio signalsTrack recording RW disc containing Recordable space All-track recordingLoad a CD-R or CD Button Automatic finalization recordingSynchro button twice Press the FinalizeAfter recording, press the stop button to end recording Manual DIGITAL-SOURCE RecordingPress the Record REC buttons RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE RecordingMinimum recording time per track Recording level adjustmentAdjustment reference Level meterMenu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time SettingSample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level SettingPress the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track numberStarting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blankChecking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skippedPlay the track which is not to be skipped Clearing skip ID of a trackPress the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded onErasing CD-RW discs Erasing CD-RW onlyPress the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalizedAll tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playbackPress and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track searchFade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playbackProgramming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservationReplacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracksCase skip playback is not required Load a disc containing the recording of skip ID dataPress the play button Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO