Fostex CR300 owner manual Manual DIGITAL-SOURCE Recording, Press the Record REC buttons

Page 21

MANUAL DIGITAL-SOURCE RECORDING

This function is for recording of digital output of other digital source than CD, DAT, MD and DCC.

(It is recommended to use the automatic digital-source synchro recording when recording signals from a CD, DAT, MD or DCC.)

•After loading the disc, check that the CD-R or CD-RW indicator stops blinking and starts to light steadily.

In case it does not light steadily , refer to page 42.

•Track numbers are automatically updated when the AUTO TRACK indicator is on.

•In recordings of CD, MD, DAT, DCC and other digital sources(S/P DIF only), track numbers are automatically updated based on start-ID and / or track number included in the digital signal information.

•AES/EBU digital signal or digital signal from media such as BS (satellite broad- casting) that contains no track number information are recorded in the same way as analog source.

•Track numbers are automatically updat- ed if the following signal is input after 2- seconds of ”no signal” condition.

•In the case of digital source input, the CR300 detects the signal less than - 90dB as ”no signal”. Track numbers are automatically updated if the signal level exceeds this level.

•Therefore recordings of classical music and other music styles with long silent passages will be recorded on more tracks than required. Turn off the auto track function and create new tracks manual- ly to avoid this problem.

•Press the PAUSE ( ) or PLAY ( ) buttons after the counter displays "00:00".

1 3 2

REC

TRACK NO.

FADER WREITE

REPEAT

5 6

1 Load a CD-R or CD-

Label side

RW disc containing

 

 

a recordable space.

 

 

For a disc loading, refer to

 

 

page 15.

 

 

2 Set the INPUT SELECTOR

INPUT SELECTOR

DIGITAL

XLR/+4ANALOG

to DIGITAL.

COAX

• XLR/-10

•

•

 

OPT •

• LINE

Select the digital input to be recorded.

AES /

 

AES/EBU or OPT or COAX

EBU •

 

 

 

3 Press the RECORD

 

 

(REC ) button(s).

 

 

• This unit enters record-

 

Press two buttons

pause mode.

 

• Check the copy bit indicator

 

together.

 

 

(refer to page 24).

4 Start playing the source player to confirm whether recording of that source is possible.

5 Press the pause (

) or

 

 

play ( ) button

in

 

 

record-pause mode.

or

or

 

 

6 After recording, press the stop ( ) button to end recording.

• "PMA REC" is displayed and the unit stops after recording the track data.

21

CR300 <PRB1291-A>

Page 20 Page 22
Image 21
Page 20 Page 22
Contents CR300 Safety Instructions Information to User For Canadian modelPour le modele Canadien Features Contents AC power cord AAA/R03 dry cell batteries ... x Checking AccessoriesBattery loading method Batteries AAA/R03 dry cell batteriesCleaning the compact disc recorder Precautions regarding installationCD lens cleaner LocationDiscs usable with this unit DiscsCD-R finalization CD-R and CD-RW discsHandling of disc Disc maintenanceDo not play a CD with a special shape Disc storageConnections Digital Signal ConnectionAnalog Signal Connection Controls and Indicators Switching the time display Parallel remote control Wireless remote controlAlso be carried out by using buttons with the same Operations performed by buttons marked canDisc LOADING/UNLOADING Turn the power on2,4 Open the disc trayMode of Recording Track numbers are updated automatically by this unitRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signalsTrack recording All-track recording Load a CD-R or CDRW disc containing Recordable space Synchro button twice Automatic finalization recordingPress the Finalize ButtonManual DIGITAL-SOURCE Recording Press the Record REC buttonsAfter recording, press the stop button to end recording Adjust the recording level Press the pause Or play button Record-pause modeANALOG-SOURCE Recording RW disc containing a Recordable spaceAdjustment reference Recording level adjustmentLevel meter Minimum recording time per trackAuto stop delay time Setting in Digital Synchro Copy Bit SettingFade In / Fade Out Time Setting Menu Button FunctionsAuto Pause Mode Setting Automatic Track Number Renewal Level Sensitivity SettingBalanced Output Level Setting Sample Rate Converter ThruManual writing of track number Track Number WritingAutomatic writing of track number Press the Track no T O / M a N U a LTo pause recording Convenient Functions for RecordingCreating a blank Starting recording with fade-inChecking the recording end point from the middle of a disc Skip ID Recording Setting skip ID to a track Track skipPlay the track to be skipped Press the Skip ID SET buttonPlay the track which is not to be skipped Clearing skip ID of a trackFinalization TOC Recording What is finalization?RW disc which has Been recorded on Press the Finalize buttonErasing CD-RW discs Erasing CD-RW onlyPress the Erase button Load a CD-RW disc w h i c h h a s b e e n recorded onLoad a CD-RW disc which has been finalized Press the pause button to start the TOC erasingAll tracks erasing Starting playback PlaybackTo pause playback Playing from the desired track Direct track selectionSearching the desired point Manual search Searching an adjacent track Track searchPress the track search Press and hold the manualPress the Repeat button of the remote control unit Playback in Auto Pause ModePlaying tracks repeatedly Repeat playback Fade-in/fade-out during playbackPlaying Tracks in the Desired Order Programmed PlaybackProgram reservation Programming pauseClearing a track from the program Clearing the entire programChecking the programmed tracks Replacing a track in the programLoad a disc containing the recording of skip ID data Press the play buttonCase skip playback is not required Message Description Ref. Character Message ListInformation messages related to playback operation Information messages related to recording operationConnections Symptom Cause RemedyTerm Function Ref. IndexAudio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO
Top Page Image Contents