Self Priming Sprinkler Pump
OWNER'S MANUAL
BEFORE YOU START
BEFORE INSTALLING PUMP, BE SURE TO READ THIS OWNER’S MANUAL CAREFULLY.
REFER TO PRODUCT DATA PLATE(S) FOR ADDITIONAL OPERATING INSTRUCTIONS AND SPECIFICATIONS.
CAUTION
•Keep work area clean,
•Keep safety labels clean and in good condition.
•Replace missing or damaged safety labels.
•Wear safety glasses while installing or performing maintenance on pump.
•Adhere to the guidelines of the National Electric Code (NEC) or Canadian Electric Code (CEC), and any other state and local codes for ALL electrical installations.
Check with the appropriate agencies or contact a licensed electrician.
Most water system problems result from improper installation. It is suggested that you read this manual carefully before installing your pump. The “TROUBLESHOOTING SECTION” will assist you in locating and eliminating the cause of any trouble you may encounter after installation. Check and make available all the tools you will need to install your pump. Required tools may include wrenches, pipe sealant, pipe fittings and nipples, screwdriver, etc.
Be sure to have available proper and adequate wiring material to complete the installation correctly.
READ AND FOLLOW SAFETY INSTRUCTIONS
This is the safety alert symbol. When you see this symbol on your pump or in this manual, look
for one of the following signal words and be alert to the potential for personal injury:
D A N G E R warns about hazards that will cause serious personal injury, death or major property damage if ignored.
WARNING warns about hazards that can cause serious personal injury, death or major property damage if ignored.
CAUTION warns about hazards that will or can cause minor personal injury or major property damage if ignored.
NOTICE indicates special instructions, which are important but not related to hazards.
Carefully read and follow all safety instructions in this manual and on pump.
WA R N I N G 
WA R N I N G
HAZARDOUS PRESSURE: Do not run pump against closed discharge. Release all system pressure before working on any component.
CAUTION Do not run pump dry. Fill pump with water before starting or pump will be damaged.
The motor on this pump is guaranteed by the manufacturer and in event of failure it must be returned to an authorized service station for repairs. Motor warranty is void if repairs aren’t made by an authorized repair station.