2.Replace the rack by inserting the rack into the supports and sliding it toward the rear of the beverage center.
To Remove and Replace the Bottom Rack
1.Lift the rack (front and back) up and pull straight out to remove.
2.Replace the rack by pushing it straight back and over the stop. Continue pushing the rack straight back and evenly until it is in place.
Stockingthe Beverage Center
NOTE: For optimum beverage and wine storage, place white wines at the top of the beverage center in the wine rack. Place red wines at the bottom.
To Stock the Beverage Center
1.Start stocking the beverage center with the bottom display rack.
2.Starting on the
3.Place the next bottle on its side with the neck of the bottle facing the front of the beverage center.
4.Alternate in this manner until the display rack is full.
5.Pull the next rack forward.
6.Starting on the
7.Place the next bottle on the shelf with the neck of the bottle facing the rear of the beverage center.
8.Continue alternating in this manner until the rack is full.
9.Slide the rack into place and continue stocking each remaining rack as described above.
10.Place juices, sodas or other canned beverages on the glass shelves.
Lighting theBeverage Center
The beverage center has an interior light that comes on any time the door is opened. You may also turn the light on at any time by opening the door and pressing the exterior switch located beside the temperature control knob on the base grille.
NOTE: Leaving the light on for an extended period of time will slightly increase the temperature of the beverage center.
7