Adjusting Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
■Press the refrigerator or freezer PLUS (+) or MINUS
■Press the Set To Recommended touch pad to reset the set points to the factory recommended temperatures.
NOTE: The set point range for the freezer is
CONDITION/REASON: | TEMPERATURE |
| ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR Control |
Not set correctly for conditions | 1° higher |
| |
|
|
REFRIGERATOR too warm | REFRIGERATOR Control |
High use or room very warm | 1° lower |
| |
|
|
FREEZER too cold | FREEZER Control |
Not set correctly for conditions | 1° higher |
| |
|
|
FREEZER too warm/too little ice | FREEZER Control |
High use or heavy ice use | 1° lower |
| |
|
|
|
|
Water Filter Indicator & Reset
See “Water Filter Indicator” section.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.
■Press MAX COOL to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.
NOTE: The temperature display will remain at 34°F (1°C) and
24 hours, the refrigerator returns to the previous temperature set points.
Alarm Functions
Master Alarm Reset
Pressing Alarm Reset once will turn off the audio alarm and indicator light. The audio alarm will not sound again for the current condition that caused the alarm until a new condition occurs or until a Master Alarm Reset is performed.
A Master Alarm Reset can be performed by pressing Cooling (ON/OFF) twice or by turning the power to the refrigerator off and
on again. See “Power On/Off Switch.” After performing a Master Alarm Reset, the indicator light will reactivate if the condition that caused the alarm is still present. See “Over Temperature,” “Call Service,” or “Door Open.”
Door Open
The Door Open indicator light will flash, an alarm will sound and the interior lights will turn off when a door has been open for longer than 10 minutes. When the door is closed, the audio alarm will reset and turn off, but the Door Open indicator light will continue to flash until the temperature is equal to or below 45°F (7°C) and 15°F
NOTE: To deactivate the audio alarm and indicator light, see “Master Alarm Reset.”
Over Temperature
IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See the “Power Interruptions.” Minimize door openings until temperatures return to normal.
The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F
1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash until the Alarm is pressed to let you know that an over temperature condition has occurred.
If the over temperature condition is still present when an Over Temperature Reset is performed, the indicator light will continue to reactivate every 1¹⁄₂ hours until refrigerator and freezer temperatures are below 48°F (9°C) and 15°F
NOTE: To deactivate the audio alarm and indicator light, see “Master Alarm Reset.”
Call Service
If the Call Service indicator light is flashing, call for service. See the “Assistance or Service” section for information on calling for service.
NOTE: To deactivate the audio alarm and indicator light, see “Master Alarm Reset.”
HolidayMode
The Holiday Mode feature is designed for the traveler or for those whose religious observances require turning off the lights and ice maker. By selecting this feature, the temperature set points and Deli Pan settings remain unchanged, the ice maker will be disabled and the interior lights will turn off. For most efficient refrigerator operation, it is recommended to exit the Holiday Mode when it is no longer required.
To fully activate Holiday Mode, you must follow the instructions below for both the control panel and dispenser panel (on some models).
IMPORTANT: If you do not activate Holiday Mode in both ways listed below, some functions you wish to disable will remain active.
7