3.Slide the chimney cover provided with the extension kit over the lower chimney support and extension frame and secure to the top of the extension frame using the two screws provided.
A
B 
C 
A
A.Screw
B.Upper chimney extension cover
C.Lower chimney cover
4.Slide lower chimney cover over the chimney support and extension chimney cover and attach to the bottom of the support using the two screws provided.
A
A. Chimney extension kit assembled to hood assembly with chimney covers attached
Install Range Hood
1.Lift the hood up against the chimney support and attach to the support with 4 bolts provided. Tighten bolts securely.
A 
B 
C 
A. Chimney support
B.Hood
C.Bolts
2.From the underside of the hood, plug control cables together as shown.
3.Insert each connected cable into a black plastic connector box half.
4.Place the top half of the connector box on each and screw the two halves together using the four screws provided for each connector box.
A
B 
B 
A.Screws
B.Connector box half
5.Using the two longer screws provided for each box, attach the assembled connector boxes to the metal flange.
Complete Installation
1.For recirculating installations only, install charcoal filter from Recirculating Chimney Kit behind the center grease filter by inserting and locking it in place.
10