Frymaster SM35 operation manual

Page 2

Please read all sections of this manual and retain for future reference.

NOTICE

This appliance is intended for professional use only and is to be operated by qualified personnel only. A Dean Factory Authorized Service Center (FASC) or other qualified professional should perform installation, maintenance, and repairs. Installation, maintenance, or repairs by unqualified personnel may void the manufacturer’s warranty.

NOTICE

This equipment must be installed in accordance with the appropriate national and local codes of

the country and/or region in which the appliance is installed. See NATIONAL CODE

REQUIREMENTS in Chapter 3 of this manual for specifics.

NOTICE

Drawings and photos used in this manual are intended to illustrate operational, cleaning and technical procedures and may not conform to onsite management operational procedures.

NOTICE

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER/DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.

DANGER

Improper installation, adjustment, maintenance or service, and unauthorized alterations or

modifications can cause property damage, injury, or death. Read the installation, operating and service instructions thoroughly before installing or servicing this equipment. Only qualified service personnel may convert this appliance to use a gas other than that for which it was originally configured.

DANGER

Adequate means must be provided to limit the movement of this appliance without depending upon the gas line connection. Single fryers equipped with legs must be stabilized by installing anchor straps. All fryers equipped with casters must be stabilized by installing restraining chains. If a flexible gas line is used, an additional restraining cable must be connected at all times when the fryer is in use.

Image 2
Contents 8195895 Page Page Table of Contents Preventative Maintenance This page Intentionally Left Blank Ordering Parts Service InformationAfter Purchase Qualified and/or Authorized Operating Personnel Safety InformationService Personnel Qualified Installation Personnel Qualified Service PersonnelThis page Intentionally Left Blank If your equipment arrives damaged Receiving and Unpacking EquipmentGeneral Principles of Operation Rating PlatePre-Installation Equipment Installed at High Altitudes ANSI/NFPA #70Air Supply and Ventilation This page Intentionally Left Blank General Installing the FryerLeg and Caster Installation Legs Only Leg and Rigid Caster InstallationLeveling the Fryer Rigid Casters OnlyInstalling Optional Swivel Casters Front ViewRear Side ViewGas Connections National Code RequirementsSupply Line Specifications Recommended Gas Supply Line Sizes Gas Types Number of FryersRegulating Gas Pressure Rigid ConnectionsManual shut-off valve Gas Connections Adjustments/Adaptation To Different Gases GAS Supply for Which IT is not ConfiguredGas Inputs BTUGas Conversion Procedures ON/PILOT/OFFGas Conversion Components Natural Gas to Propane Kit Propane To Natural Gas KitElectrical Connections Dean Millivolt Series GAS Fryers NON-CE Fryer Operations Initial Start-upDean Millivolt Series GAS Fryers NON-CE Fryer Operations Boil-Out Procedure Final Preparation Dean Millivolt Series GAS Fryers NON-CE Fryer Operations This page Intentionally Left Blank Weekly Periodic/ Annual Dean Millivolt Series GAS Fryers NON-CE Troubleshooting Pilot Burner MalfunctionMain Burner Malfunctions Wiring Diagrams Recommended Spare PartsService Hotline