DEAN MILLIVOLT SERIES GAS FRYERS
5.1 General
DANGER
Never attempt to clean the fryer during the cooking process or when the frypot is filled with hot oil/shortening. If water comes in contact with oil/shortening heated to cooking temperature, it will cause spattering of the oil/shortening, which can result in severe burns to nearby personnel.
Any equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. Dean millivolt gas fryers should be kept clean during the working day and thoroughly cleaned at the end of each day. Below are recommendations for daily, weekly and periodic preventative maintenance.
5.1.1 Daily
WARNING
Use a commercial grade cleaner formulated to effectively clean and sanitize food- contact surfaces. Read the directions for use and precautionary statements before use. Particular attention must be paid to the concentration of cleaner and the length of time the cleaner remains on the
A.Remove and wash all removable parts.
B.Clean all exterior surfaces of the cabinet. Do not use cleaners, steel wool, or any other abrasive material on stainless steel.
C.Filter the cooking oil and replace if necessary. The oil should be filtered more frequently when under heavy use.
5.1.2Weekly
A.Completely drain the oil from the fryer into a metal stockpot of sufficient size to safely hold the entire contents of the frypot for disposal. Do not use a glass or plastic container.
B.Clean the frypot by following
WARNING
Never allow water to boil down and expose the heating tubes. Frypot damage will
result.