CF SERIES GAS FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
ACCESSING THE PILOT
The pilot is mounted on the left side of the burner manifold and is accessed through an opening in the front frypot insulation. Swing the round cover open and insert a long match or taper through the hole (see photo) when lighting the pilot.
Insert match or taper through this hole to light pilot.
LIGHTING THE PILOT ON NON-CE FRYERS
1.Ensure power to the unit is OFF, and then turn the gas valve knob to the OFF position. Wait at least 5 minutes, and then rotate the gas valve knob to the PILOT position (see Figure 1).
Lighting the Pilot
| PILOT |
ON | OFF |
| Figure 1 |
| PILOT |
ON | OFF |
| Figure 2 |
2.Push the knob in and light the pilot. (If the fryer is equipped with a piezo ignitor, repeatedly press the piezo ignitor button while depressing the gas valve knob until the pilot lights.) Continue to hold the knob in for about 60 seconds after the flame appears on the pilot. Release the knob. The pilot should remain lit.
CAUTION
If the pilot fails to remain lit, turn the gas valve knob to the OFF position and wait at
least five minutes before attempting to re-light.
3. With the pilot lit, push down and slowly turn the knob to the ON position (Figure 2).