CF SERIES GAS FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
If you are using a Frymaster filter cone holder, be sure that the cone holder rests securely on the metal container.
3.Open the drain valve slowly to avoid splattering. If the drain valve becomes clogged with food particles, use the Fryer’s Friend
DANGER
DO NOT insert anything into the drain from the front to unclog the valve. Hot oil will
rush out, creating an extreme hazard.
WARNING
DO NOT hammer on the drain valve with the Fryer’s Friend. This will damage the drain valve ball and prevent the valve from sealing securely, resulting in a leaky valve.
4.After draining the oil, clean all food particles and residual oil from the frypot. If the fryer is equipped with a float switch, clean it at this time. The float switch prevents frypot damage in the event the power switch is not OFF while draining used oil. The float switch must be cleaned on a regular basis to ensure proper operation. Use caution as frypot residue can cause severe burns if it contacts bare skin.
5.Close the drain valve securely and fill the frypot with clean, filtered or fresh cooking oil or solid shortening to the bottom
DANGER
When using solid shortening, pack it down into the