Panasonic NE-C1275 operating instructions Operating your Oven on Convection, Controls to USE

Operating your Oven on Convection

CONTROLS TO USE

*The oven will memorise the last CONVECTION temperature used should you wish to use the same one again.

Press the CONVECTION pad when cooking is complete & the last temperature used will be displayed.

	ACTION	INFORMATION	DISPLAY
1	Open Door.	The oven lamp will come on.
	Put in Food.
	Close Door.	Oven lamp turns off.
2	Press	Select required oven
	Convection	temperature. eg. 180˚C
	Pad.*	Continue to press Convection
		Pad until temperature
		required appears in display
		window.
		Temperature counts up in
		10˚C from 100˚C-250˚C.

3Select Time. Press Number Pads to set a

heating time. eg.18 mins.

Press Pads 1,8,0 and 0. Max heating time is:

99 mins. 99 secs..

4 Press		Display window will count
	Start Pad.	down time.
		The Convection fan turns on.

5 Open Door. At end of heating programme, End of Programme oven beeps

3 times, and “0” flashes in window until door is opened.

Open Door

Remove food.

Display window will indicate the previous programme.

ACCESSORIES TO USE

For best results place the cooking container on Wire Rack Shelf in LOWER position. Food can be placed directly on the Wire Rack Shelf if it is thoroughly cleaned before use.

Caution:

There is NO NON-TIP Safety Lock on Wire Rack Shelf.

Take care when removing food.

10