Operating your Oven on Fan Grill
Hot Surfaces
Take great care when removing hot food. Use oven gloves.
Multi-Stage (Sequential) Heating
The oven can be programmed with up to 3 different stages to operate in sequence. These can be
MICROWAVE, GRILL, CONVECTION , FAN GRILL, GRILL CONVECTION or COMBINATION functions.
For 2 stage programming:
Follow steps
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating programme before pressing START Pad.
Recalling Fan Grill Temperature
The temperature selected can be checked during operation by pressing Fan Grill Pad. Temperature will be displayed for 3 seconds before returning to remaining heating time.
The temperature cannot be altered during a programme.
Preheat
For best result on Fan Grill the oven should be preheated.
(see page 26)
Oven Lamp
The Oven Lamp switches off when the door is closed. If you want to check the food, press Oven Lamp Pad, it will then illuminate for 10 seconds.
The Oven Lamp turns on whenever the door is opened.
Repeat Feature
You can repeat the same heating programme if you touch the Start Pad within 1 minute of the previous programme finishing.
After 1 minute, if Start Pad is not pressed the display goes blank if the oven door is closed.
After 30 minutes returns to “0” if the oven door is open.
Stop/Reset Pad
Before heating: One press clears the display.
During heating: One press stops the heating cycle and two presses clear the display.
N.B. see page 24 for operation whilst in Programme Lock.
Fan Grill
17