Extron electronic manual DVS 605 • Introduction

•AFL - Accu-RATE Frame Lock — A patented technology exclusive to Extron that eliminates image tearing caused by frame rate conversion.

•Image freeze control — A live image can be frozen using control via USB, RS-232 serial, Ethernet, or IR control.

•Auto-Image setup — When activated, the unit automatically detects the resolution of the incoming video signal and sets the total pixels, active pixels, and active lines, as well as the horizontal and vertical starting points.

•Auto Input Memory — When activated, the DVS 605 automatically stores size, position, and picture settings based on the incoming signal. When the same signal is detected again, these image settings are automatically recalled from memory.

•On-screen display — The DVS 605 features an on-screen display that displays status information of the currently selected input.

•On-screen input labels — An on-screen text label may be assigned to each input. The label can be up to 16 characters and input via RS-232 or Ethernet.

•Power screen saver mode and standby modes — The DVS 605 can be set to automatically mute video and sync output to the display device when no active input signal is detected. This allows the projector or flat-panel display to automatically enter into standby mode to save energy and enhance lamp or panel life.

•Picture controls — These include brightness, contrast, color, tint, and detail, as well as horizontal and vertical positioning, and sizing. 16 user memory presets are available for each input to store all image settings.

•Automatic 3:2 and 2:2 pulldown detection — The DVS 605 offers advanced film mode processing techniques that help maximize image detail and sharpness for NTSC, PAL, and HDTV 1080i sources that originated from film.

•Motion adaptive 1080i and SD de-interlacing — The DVS 605 provides high performance de-interlacing for 1080i and standard definition signals from sources including cable or satellite set-top boxes, delivering optimized image quality through advanced motion compensation.

•Aspect ratio control — The aspect ratio of the video output can be controlled by selecting a Fill mode, which provides a full screen output, or a Follow mode, which preserves the original aspect ratio of the input signal.

•Quad standard video decoding — The DVS 605 uses a digital, 3D adaptive comb filter to decode NTSC 3.58, NTSC 4.43, PAL, and SECAM signals for integration into systems worldwide.

•Internal test patterns for calibration and setup — The DVS 605 offers 14 test patterns; crop pattern, crosshatch, 16 bar grayscale, color bars, alternating pixels, ramp, white field, 4 x 4 crosshatch, and four aspect ratio patterns – 1.33, 1.78, 1.85, and 2.35.

•Optional 3G/HD-SDI output with genlock — This output complies with SMPTE 292M and 424M, and ITU digital video standards. Genlock allows synchronization to an external reference signal for integration into broadcast and production applications.

•Front panel security lockout — This feature locks out all front panel functions except for input selection; all functions however, are available through USB, RS-232, or Ethernet control.

•Hardwired IR connection — The DVS 605 features a rear panel hardwired IR port for connection to Extron MediaLink Controllers, IP Link Control Processors, or IR receivers for additional control flexibility.

•Ethernet monitoring and control — The DVS 605 can be controlled and proactively monitored over a LAN, WAN, or the Internet. An intuitive web interface is included for setup and control.

DVS 605 • Introduction 5