Breakaway audio check box (audio models only)
Select this check box to enable audio breakaway. The input buttons separate into two columns: video and audio.
From the Video column, click the input button associated with the video to be used.
From the Audio column, click on the input button associated with the audio to be used.
NOTES: When in PIP mode, audio breakaway is not supported. |
Audio follows either the main window or the PIP window (set on |
the Devices Settings screen). |
Video only and Audio only switching (breakaway) Rules
When the current audio input is configured for digital audio:
•Digital audio is not available from any input other than the currently selected video input.
•
•
•
When the current audio input is configured for analog audio:
•
•
•
•When switching
Clear the Breakaway Audio check box to disable the audio breakaway.
Video and audio mute buttons
Click Video Mute to mute only the video signal. The button turns blue.
Click Audio Mute to mute only the audio. The button turns red.
Click AV Mute to mute both video and audio simultaneously.
The button turns red and the Video and Audio mute buttons are also activated.
To unmute any signal, click on the appropriate button. The button reverts to the default color, indicating the signal has been unmuted.
Freeze button
Click Freeze to freeze the current video image. The button turns blue, indicating the image is frozen.
Click it again to unfreeze the image. The buttons reverts to the default color.
DVS 605 • Using the Default Web Pages | 64 |