Extron electronic DVS 605 manual Audio input format, Audio output format, Audio follow, Command

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)

Audio input format

NOTES: • Selects between analog (5-pole captive screw) or digital (embedded in HDMI input) audio sources.

• Inputs 1 and 2 X4@ can only be set to 0 or 1; attempting to set these inputs to a digital format yields an E14 response.

• Digital auto modes (4 or 5) detect and use embedded audio when present, or analog audio if digital audio is not detected

Set to None	EIX!*0AFMT}	AfmtIX!*0]	Mutes all audio for input X!.
Set to Analog	EIX!*1AFMT}	AfmtIX!*1]	Select analog audio for input X! (default
			for inputs 1 and 2).

Set to 2Ch digital	EIX!*2AFMT}	AfmtIX!*2]
Set to Full digital	EIX!*3AFMT}	AfmtIX!*3]
Set to 2Ch digital	EIX!*4AFMT}	AfmtIX!*4]
auto
Set to Full digital	EIX!*5AFMT}	AfmtIX!*5]
auto
View audio type	EIX!AFMT}	X4@]

Select 2Ch digital audio for input X! (default for inputs 3, 4, and 5).

Select Full digital audio for input X!.

Select auto detect audio for input X! (valid for inputs 3, 4, and 5 only — EDID set to

2Ch).

Select auto detect audio for input X! (valid for inputs 3, 4, and 5 only — EDID set to

Full).

View the audio input type X4@ for input X!.

Audio output format

Set format	EOX3(AFMT}	AfmtOX3(]	Set the fixed and variable audio output
			format.
View format	EOAFMT}	X3(]	View audio output format.

Audio follow

Set	EX4!AFLW}	AflwX4!]	Select audio source (main versus PIP).
View	EAFLW}	X4!]	View audio source (main versus PIP).

NOTE: X! = Input selection: 1 to 5

X3( = Audio output format: 1 = dual mono, 2 = stereo (default)

X4! = Audio source: 0 = Follow Main window, 1 = Follow PIP window, 2 = Toggle source

X4@ = Audio input type: 0 = none, 1 = analog, 2 = 2Ch digital, 3 = Full digital, 4 = 2Ch digital auto, 5 = Full digital auto

See X4@ for full variable description on page 38.

DVS 605 • SIS Communication and Control 49