Extron electronic DVS 605 manual Key Features, Video Inputs, Video Outputs

Key Features

Video Inputs

• Three HDMI and two universal analog video inputs — The two universal 15-pin

HD inputs automatically detect incoming RGB, HD component video, YUVi, S-video,

or composite video signals. The DVS 605 allows for seamless switching between

HDMI and analog video sources.

• Auto input format detection — For the universal analog video inputs, the DVS 605

detects the incoming signal format, automatically reconfiguring the scaler to provide

the appropriate decoding and signal processing.

• Auto-switching between inputs — The DVS 605 can automatically switch between

input sources. The unit can be set up to automatically switch to an active input, by

giving priority to the highest active input (51), or to the lowest active input (15).

This allows for simple, automated control of the DVS 605 when a control system is

not in use.

Auto Switch feature detects “active” video inputs by the presence of valid Horizontal

and Vertical sync inputs, and not by the presence of an input cable, or +5 VDC from

a source that is currently not outputting active video. Using simultaneous video input

detection on all inputs, the DVS 605 will switch to the active input depending on the

configured order of precedence (highlow vs. lowhigh).

With auto-switching, the DVS 605 can accommodate additional inputs when

connected to the outputs of a larger presentation switcher, or can be used for

unmanaged switching, or as an upstream matrix switcher.

NOTE: When Auto Switch mode is active, PIP mode cannot be enabled. Similarly,

if PIP mode is currently active, Auto Switch mode cannot be enabled.

• True seamless switching — Seamless cut and dissolve transition effects are

available for inputs 1 to 4. Input 5 features glitch-free switching with a fade through to

black.

Video Outputs

•3G/HD-SDI output — Active only if the current resolution is set to 720p, 1080i, 1080p, or 2k 23.98/24/25 Hz. All video outputs (HDMI, VGA, SDI) share a common output resolution and display the same content.

•Simultaneous scaled outputs for HDMI, HD-SDI, and analog RGB or HD component video — HDMI and high resolution analog RGB or component video outputs are available for driving two displays.

•Selectable output rates — Available output rates include computer video (640x480 ) up to 1920x1200, HDTV rates up to 1080p/60 Hz, and 2048x1080 (2k/60 Hz).

•Picture-in-picture (PIP) — For inputs 1 to 4, the DVS 605 provides unrestricted two-window display of standard definition and high resolution digital and analog video sources. Multiple PIP presets are available, including side-by-side windows. The main and PIP windows can be dynamically sized, positioned, and magnified. In audio models, audio switching can be set to follow either the main or PIP window.

DVS 605 • Introduction 3