
Symbol Definitions
• = Space
] = Carriage return with line feed
¦or} = Carriage return with no line feed
E or W = Escape
14, 24, 28 = Superscripts indicate the error message displayed if the command is entered incorrectly or with invalid parameters. See “Error Response References,” on page 35.
X! = Input selection,
X@ = Output selection:
0 = All outputs (default)
1 = Analog (VGA, YUVp, HDTV)
2 = HDMI
3 =
4 = None
X# = Input video format: |
|
| ||
0 | = No signal detected (only valid for detected input format query, such as X!*\ or “ I”) | |||
1 | = RGB | 5 | = Composite video | |
2 | = YUV auto | 6 | = DVI/HDMI (available only for inputs 3, 4, and 5) | |
3 | = RGBcvS 7 = Auto detect (default for inputs 1 and 2) | |||
4 | = |
|
|
X$ = Horizontal/vertical start — 0 to 255 (default midpoint = 128)
X% = Pixel phase — 0 to 63 (default = 31)
X^ = Total pixels — ±512 of the default value
X& = Active pixels — ±512 of the default value
X* = Active lines — ±512 of the default value
X( = Enable/disable: 0 = Off/disable, 1 = On/enable
X1) = Input standard: |
|
| |
0 | = No signal detected | 3 | = NTSC 4.43 |
1 | = NTSC 3.85 | 4 | = SECAM |
2 | = PAL |
|
|
- = N/A (occurs when input is an active RBG, YUV auto [but not NTSC/PAL], or HDMI signal)
X1! = Internal temperature (in degrees Celsius)
X1@ = Unit name is a text string of up to 24 characters drawn from the alphabet
and the minus sign/hyphen
X1# = Horizontal and vertical frequencies (format is
X1$ = Text label/preset name: up to 16 characters
NOTE: User and input presets saved without a name are saved with the default names
“User Preset xx” (for example, User preset 12) or “Input preset xxx” (for example, input preset 122).
X1% = Picture adjustment — 0 to 127 (default = 64)
X1^ = Horizontal and vertical position, ±11000, with leading “+” or
DVS 605 • SIS Communication and Control | 36 |