Extron electronic DVS 605 manual Image Settings Page, Signal Sampling

Page 77
Image Settings Page

Image Settings Page

From this page signal sampling and picture control settings can be set, user and input presets can be saved and recalled, and overscan settings can be applied.

Click on this button Figure 38. Image Settings PageSignal Sampling to open the Image Settings page.

Figure 38. Image Settings Page

Signal Sampling

In this section settings for the currently selected input signal can be adjusted. Adjustable fields are: the number of active lines, active pixels, total pixels, horizontal and vertical start settings, and the pixel phase. In addition an Auto-Image (with Fill or Follow modes) can be executed on the input.

In the Signal Sampling section, adjust an input signal setting by entering a value or clicking the up > and down < arrows in the field associated with the setting. An asterisk beside a chosen value for a signal sampling setting indicates that it is a default value for the applied input signal.

An Auto-Image can also be executed on the current input. Auto-Image automatically sizes and centers the selected input. If an unknown input is connected to the device, the processor measures and estimates the resolution of the incoming video.

To perform an Auto-Image:

1.Click on the Auto-Imagebutton. A drop-down list opens.

2.Select Auto-Image: with fill (to fill the entire video output) or

Auto‑Image: with follow (to maintain the aspect ratio of the input).

See Auto-Image in the “Input Configuration“ section on page 66 for steps to set automatic activation.

DVS 605 • Using the Default Web Pages

71

Image 77
Contents with Seamless Switching SCALERS AND SIGNAL PROCESSORSUser Guide HDCP-CompliantScalerSafety Instructions • English Safety InstructionsChinese Simplified(简体中文) Instructions de sécurité • FrançaisTrademarks FCC Class A NoticeCopyright Software Commands Specifications AvailabilityConventions Used in this Guide NotificationsSIS Communication and Control ContentsUsing the Default Web Pages Mounting the DVS DVS 605 Series Description IntroductionLicensed Third-partySoftware Used in the DVS Licensed Third-partySoftware Used in the DVSPackage LicenseVideo Outputs Key FeaturesVideo Inputs DVS 605 • Introduction AudioGeneral DVS 605 • Introduction Controlling the DVS Rear Panel Connections DVS 605 Rear Panel Features — All ModelsRear Panel Cabling FigureDVS using the LockIt bracket as follows Figure Audio Input Connector WiringFigure 2. LockIt Bracket Mounting Options Figure 6. RJ-45LAN Connector Wiring Figure 4. Audio Output Connector WiringFigure 5. Audio Output Connector Wiring DVS 605 • Rear Panel Connections •Other DVS 605 Operating Features •Front Panel Overview •Powering UpFigure 7. DVS 605 Front Panel Features OperationDefault Display Cycle Powering UpMenu Navigation Using Front Panel Controls Figure 8. Typical Default Display CycleFigure 9. Top Level Menus Menu OverviewDVS 605 • Operation Figure 10. Main MenuFigure 11. User Preset Menu User PresetsPicture Control Figure 12. Picture Control MenuFigure 13. Input Configuration Menu Input ConfigurationInput video types InputFigure 14. Output Configuration Menu Output ConfigurationResolutions and Refresh Rates Sync Polarity Analog Output FormatHDMI Format HDCP NotificationGenlock/AFL Modes HDCP Status: Inputs & OutputsHDCP Authorized Genlock/AFL Offset Description Figure 17. Audio Configuration Menu Audio Configuration All ModelsAudio Delay Setting Aspect Ratio Advanced ConfigurationFigure 18. Advanced Configuration Menu Auto Memory Auto-Imagethreshold settingsAuto-Image Overscan Switch typeTest pattern OSD durationFactory Reset View Comm SettingsFigure 21. Edit Comm Settings Menu Exit MenuFigure 22. Front Panel Lockout Front Panel Lockout Executive ModesEnable Executive Mode Disable Executive ModeDVS 605 Operation Window vs. Image Size Position — An OverviewNOTES Picture-in-picturePIP ModeFront Panel Activation Figure 24. Default Main and PIP Window Layouts PIP PresetsPower Save Other DVS 605 Operating FeaturesCustom EDID/Custom Output Resolution Screen SaveThe OSD Bug Hardwired IR PortAudio Format Audio SourceDVS 605 Reset Mode Summary Resetting the UnitFigure 25. Reset Mode Comparison Reset All IP Reset to Factory Defaults SettingsCopyright Information SIS Communication and Control•Commands and Responses Host to Scaler CommunicationsPassword Information Commands and ResponsesError Responses Error Response ReferencesDVS 605 • SIS Communication and Control Symbol DefinitionsDVS 605 SIS Communication and Control Figure 29. SIS Command EDID TableDVS 605 SIS Communication and Control DVS 605 • SIS Communication and Control DVS 605 • SIS Communication and Control SIS IP command definitionsDVS 605 • SIS Communication and Control Command SIS Command and Response TableASCII Command ResponseInput name Additional DescriptionAuto-Image Horizontal startASCII Command CommandResponse Additional DescriptionVideo mute Picture AdjustmentsColor TintVertical position window Horizontal position windowHorizontal position image Vertical position imagePower save mode Output ConfigurationHorizontal size image Output scaler rateVolume control audio models only Audio Configuration Audio mute global settingsAudio delay available on all models CommandAudio output format Audio input formatAudio follow CommandUser preset name Presets User presetsInput presets Input preset nameTest pattern Advanced ConfigurationFreeze Auto memories per inputEffect duration Video effectFront panel security lockout Executive Mode HDCP notification green screen/messageGenlock Video signal presenceGenlock/AFL Offset CommandReset commands Hardwired IR portPicture In Picture PIP on/offInformation request Backup/restore configurationProduct naming CommandFirmware version requests Ethernet data portCommand ASCII TelnetInformation requests IP setup commandsCommand ASCII TelnetNOTE: E X12!CA File erase commands Directory commandsRe-mapport designations CommandAccessing the Default Web Pages Using the Default Web Pages•Accessing the Default Web Pages Navigating the Default Web PagesTurning Off Compatibility Mode Navigating the Default Web PagesTo check compatibility view settings AV Controls Panel Configuration PagesAuto-Imagebutton AV input buttons inputsFreeze button Breakaway audio check box audio models onlyVideo and audio mute buttons Figure 34. Input Configuration Panel Signal typeInput renaming RGB ScaledFilm Detect Aspect ratioAuto-Image Auto MemoryAnalog signal format ResolutionFigure 35. Input Configuration Panel Refresh rateSwitch transition Digital output signal formatGenlock Test patternFigure 36. EDID Minder Page EDID Minder PageFigure 37. Assigning EDIDs Assigning EDIDsFigure 38. Image Settings Page Image Settings PageSignal Sampling Settings Included Within Presets User PresetsSetting User PresetOverscan Input PresetsFigure 40. PIP Settings Page PIP Settings PagePIP input selection Snap PIP toSize and Position PIP picture controlsHorizontal Size and Vertical Size fields Horizontal Pos and Vertical Pos fieldsFigure 41. PIP Preset Default Window Locations PIP presetsFigure 42. Audio Config Page Audio Settings PageNone •2-CHDigital •Full DigitalStereo Dual MonoFigure 43. Preset Management Page Preset Management Pagea.Recall: Inputs, Size & Position, or b.Recall: Size & Position OnlyFigure 44. Device Settings Page Device Settings Page1.Select the Enable On Screen Display check box Screen Saver SettingsOn Screen Display Message HDCP NotificationAuto Switch Unit Information Page Hardware PagesFigure 46. Unit Information Page See Licensed Third-partySoftware Used in theFigure 48. Connection Settings Page Connection Settings PageDevice Name Page Figure 47. Device Name PageEthernet Settings RS-232SettingsFirmware Loader Page Figure 49. Firmware Loader PageExecutive Mode Executive/Power Mode PageFigure 50. Executive/Power Mode Page Date and Time Page Power ModeMute Video and Sync Figure 51. Date and Time PageFigure 52. Password Page Password Pagedevice name, DHCP setting, and port mapping Reset Device PageFigure 53. Reset Device Page Mounting Tabletop PlacementMounting the DVS UL Guidelines for Rack Mounted DevicesFurniture Mounting Rack MountingFigure 54. Rack Mounting the DVS Figure 55. Furniture Mounting the DVSUSA, Canada, South America Extron Warrantyand Central America Japan
Related manuals
Manual 4 pages 24.4 Kb