Extron electronic DVS 605 Information request, Backup/restore configuration, Product naming, type

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)
Information request
General information	I/i	VidX!•AudX!•VtypX#•StdX1)•BlkX3!•HrtX1#•VrtX1#
		•PipX!]

NOTE: Aud “X!” response is a “-” on the non audio model. “Vtyp” returns the detected input type (X!*\) . NOTE: Blk “X3!” response is “0” unless video is muted, then the response is “1”

Query firmware	Q/q	x.xx]	View firmware version.
version
Query full firmware	*Q/*q	x.xx.xxxx]	View full firmware version details.
version
Query part number	N/n	zz-zzz-zz]	View part number.
View internal	E20STAT}	Stat20•X1!]	Temperature in degrees Celsius.
temperature

Backup/restore configuration

NOTE: {config type} = 0 = IP config (ip.cfg), 1 = event config (event.cfg), 2 = unit specific parameters (box.cfg), The files are stored on directory /nortxe-backup created on the unit by the “save” commands.

Save device	E1*{config type}	Cfg1*{config	Save unit configuration to file system.
configuration	XF}	type}]
Restore device	E0*{config type}	Cfg1*{config	Restore unit configuration from file system.
configuration	XF}	type}]
Product naming

NOTE: The 24 superscript shown below indicates that the user will get an E24 error on an IP Link-based device (such as the DVS 605) if the user is not logged in as Administrator when trying to alter names.

Set unit name 24	EX1@CN}	Ipn•X1@]	Set unit name to X1@.
Set unit name to	E•CN}	Ipn•X10)]	Set unit name to default X10).
factory default 24
View unit name	ECN}	X1@]	View unit name.

NOTE: X! = Input selection, 1 to 5

X# = Input video format, 0 = No signal detected (only valid for detected input format query, such as X!*\), 1 = RGB,

2 = YUV Auto, 3 = RGBcvS, 4 = S-video, 5 = Composite, 6 = DVI/HDMI (Only available for IN3, IN4, and IN5)

X1) = Input standard, 0 = No signal detected (current input), 1 = NTSC 3.85, 2 = PAL, 3 = NTSC 4.43, 4 = SECAM

- = N/A (occurs when input is an active RBG, YUV Auto [but not NTSC/PAL], or HDMI signal

X1! = Internal temperature (in degrees Celsius)

X1@ = Unit name is a text string of up to 24 characters drawn from the alphabet (A-Z), digits (0-9), and the minus sign/hyphen (-).

The first character must be an alpha character. The last character must not be a minus. No blank or space characters are

permitted, and no distinction is made between upper- and lowercase.

X1# = Horizontal and vertical frequencies (format is three digit with single decimal and leading zeros for example, 075.3)

X3! = Video mute: 0 = off/disable, 1 = on/enable (mute to black)

X10) = Default name: combination of model name and last 3 pairs of MAC address (for example DVS-605-Series-07-8C-EC)

DVS 605 • SIS Communication and Control 55