Extron electronic DVS 605 manual The OSD Bug, Hardwired IR Port, Audio Format, Audio Source, Edid

Page 38

Audio Format

Audio Format	Audio Source	Analog Input	Digital Inputs	EDID

None	Muted	Yes	Yes	No CEA

Analog	5-Pole Captive	Yes	Yes	No CEA

LPCM-2Ch	Embedded Digital	No	Yes	LPCM-2Ch CEA

Multi-Ch	Embedded Digital	No	Yes	Multi-Ch CEA

LPCM-2Ch Auto	Embedded Digital	No	Yes	LPCM-2Ch CEA
	(when present), else
	5-Pole Captive

Multi-Ch Auto	Embedded Digital	No	Yes	Multi-Ch CEA
	(when present), else
	5-Pole Captive

NOTE: If one of the custom EDID slots is in use, the audio format setting will have no

effect on the emulated EDID table.

It is important that care should be taken when assigning custom EDID files, as the user can potentially assign an analog (VGA) EDID to a digital (HDMI) input, or vice versa. If an EDID file listing support for the incorrect video format has been assigned, the attached source may not output any video, or unexpected behavior may result.

The OSD Bug

When switching between inputs, the DVS 605 will display a small OSD “bug” in the upper left corner. This bug contains information regarding the detected input rate and format, the HDCP status of the selected input, and an indication of Main vs. PIP inputs. The OSD bug can be disabled by setting the OSD duration to 0.0 seconds via the front panel, the internal web pages, or by SIS commands.

The items displayed are:

•Main vs. PIP

•Detected input rate

•HDCP Lock

Hardwired IR Port

The DVS 605 includes a hardwired IR input, to be used with a hardwired IR output from an Extron MLC, IPL, or similar controller. This port allows for simple, unidirectional control of the DVS 605 from a host controller that has no available RS-232 ports, but does have available hardwired IR outputs.

Using the DVS 605 IR driver, available from the Extron website, basic controls include:

•Input Switching

•Auto-Image, Auto-Image + Fill, Auto-Image + Follow

•Audio Mute, Video Mute, A/V Mute

•Volume

•PIP On/Off, PIP Swap

•User Presets Recall 1, 2, and 3 (for the selected input)

•PIP Preset Recall 1 – 6 (with or without input)

•Show Informational On Screen Display (OSD)

NOTE: There is no available IR remote for the DVS 605.

DVS 605 • Operation

32

Image 38

Contents User Guide SCALERS AND SIGNAL PROCESSORSwith Seamless Switching HDCP-CompliantScalerChinese Simplified（简体中文） Safety InstructionsSafety Instructions • English Instructions de sécurité • FrançaisTrademarks FCC Class A NoticeCopyright Conventions Used in this Guide Specifications AvailabilitySoftware Commands NotificationsSIS Communication and Control ContentsUsing the Default Web Pages Mounting the DVS Introduction DVS 605 Series DescriptionPackage Licensed Third-partySoftware Used in the DVSLicensed Third-partySoftware Used in the DVS LicenseVideo Outputs Key FeaturesVideo Inputs DVS 605 • Introduction AudioGeneral DVS 605 • Introduction Controlling the DVS Rear Panel Cabling DVS 605 Rear Panel Features — All ModelsRear Panel Connections FigureDVS using the LockIt bracket as follows Figure Audio Input Connector WiringFigure 2. LockIt Bracket Mounting Options Figure 6. RJ-45LAN Connector Wiring Figure 4. Audio Output Connector WiringFigure 5. Audio Output Connector Wiring DVS 605 • Rear Panel Connections Figure 7. DVS 605 Front Panel Features •Front Panel Overview •Powering Up•Other DVS 605 Operating Features OperationMenu Navigation Using Front Panel Controls Powering UpDefault Display Cycle Figure 8. Typical Default Display CycleMenu Overview Figure 9. Top Level MenusFigure 10. Main Menu DVS 605 • OperationPicture Control User PresetsFigure 11. User Preset Menu Figure 12. Picture Control MenuInput video types Input ConfigurationFigure 13. Input Configuration Menu InputFigure 14. Output Configuration Menu Output ConfigurationResolutions and Refresh Rates HDMI Format Analog Output FormatSync Polarity HDCP NotificationGenlock/AFL Modes HDCP Status: Inputs & OutputsHDCP Authorized Genlock/AFL Offset Description Figure 17. Audio Configuration Menu Audio Configuration All ModelsAudio Delay Setting Aspect Ratio Advanced ConfigurationFigure 18. Advanced Configuration Menu Auto Memory Auto-Imagethreshold settingsAuto-Image Test pattern Switch typeOverscan OSD durationFigure 21. Edit Comm Settings Menu View Comm SettingsFactory Reset Exit MenuEnable Executive Mode Front Panel Lockout Executive ModesFigure 22. Front Panel Lockout Disable Executive ModeWindow vs. Image Size Position — An Overview DVS 605 OperationNOTES Picture-in-picturePIP ModeFront Panel Activation PIP Presets Figure 24. Default Main and PIP Window LayoutsCustom EDID/Custom Output Resolution Other DVS 605 Operating FeaturesPower Save Screen SaveAudio Format Hardwired IR PortThe OSD Bug Audio SourceFigure 25. Reset Mode Comparison Resetting the UnitDVS 605 Reset Mode Summary Reset All IP Reset to Factory Defaults Settings•Commands and Responses SIS Communication and ControlCopyright Information Host to Scaler CommunicationsError Responses Commands and ResponsesPassword Information Error Response ReferencesSymbol Definitions DVS 605 • SIS Communication and ControlFigure 29. SIS Command EDID Table DVS 605 SIS Communication and ControlDVS 605 SIS Communication and Control DVS 605 • SIS Communication and Control SIS IP command definitions DVS 605 • SIS Communication and ControlDVS 605 • SIS Communication and Control ASCII Command SIS Command and Response TableCommand ResponseAuto-Image Additional DescriptionInput name Horizontal startResponse CommandASCII Command Additional DescriptionColor Picture AdjustmentsVideo mute TintHorizontal position image Horizontal position windowVertical position window Vertical position imageHorizontal size image Output ConfigurationPower save mode Output scaler rateAudio delay available on all models Audio Configuration Audio mute global settingsVolume control audio models only CommandAudio follow Audio input formatAudio output format CommandInput presets Presets User presetsUser preset name Input preset nameFreeze Advanced ConfigurationTest pattern Auto memories per inputFront panel security lockout Executive Mode Video effectEffect duration HDCP notification green screen/messageGenlock/AFL Offset Video signal presenceGenlock CommandPicture In Picture Hardwired IR portReset commands PIP on/offProduct naming Backup/restore configurationInformation request CommandCommand Ethernet data portFirmware version requests ASCII TelnetCommand IP setup commandsInformation requests ASCII TelnetNOTE: E X12!CA Re-mapport designations Directory commandsFile erase commands Command•Accessing the Default Web Pages Using the Default Web PagesAccessing the Default Web Pages Navigating the Default Web PagesTurning Off Compatibility Mode Navigating the Default Web PagesTo check compatibility view settings Auto-Imagebutton Configuration PagesAV Controls Panel AV input buttons inputsFreeze button Breakaway audio check box audio models onlyVideo and audio mute buttons Input renaming Signal typeFigure 34. Input Configuration Panel RGB ScaledAuto-Image Aspect ratioFilm Detect Auto MemoryFigure 35. Input Configuration Panel ResolutionAnalog signal format Refresh rateGenlock Digital output signal formatSwitch transition Test patternEDID Minder Page Figure 36. EDID Minder PageAssigning EDIDs Figure 37. Assigning EDIDsFigure 38. Image Settings Page Image Settings PageSignal Sampling Setting User PresetsSettings Included Within Presets User PresetInput Presets OverscanPIP input selection PIP Settings PageFigure 40. PIP Settings Page Snap PIP toHorizontal Size and Vertical Size fields PIP picture controlsSize and Position Horizontal Pos and Vertical Pos fieldsPIP presets Figure 41. PIP Preset Default Window LocationsNone Audio Settings PageFigure 42. Audio Config Page •2-CHDigital •Full DigitalDual Mono Stereoa.Recall: Inputs, Size & Position, or Preset Management PageFigure 43. Preset Management Page b.Recall: Size & Position OnlyDevice Settings Page Figure 44. Device Settings PageOn Screen Display Message Screen Saver Settings1.Select the Enable On Screen Display check box HDCP NotificationAuto Switch Figure 46. Unit Information Page Hardware PagesUnit Information Page See Licensed Third-partySoftware Used in theDevice Name Page Connection Settings PageFigure 48. Connection Settings Page Figure 47. Device Name PageFirmware Loader Page RS-232SettingsEthernet Settings Figure 49. Firmware Loader PageExecutive Mode Executive/Power Mode PageFigure 50. Executive/Power Mode Page Mute Video and Sync Power ModeDate and Time Page Figure 51. Date and Time PagePassword Page Figure 52. Password Pagedevice name, DHCP setting, and port mapping Reset Device PageFigure 53. Reset Device Page Mounting the DVS Tabletop PlacementMounting UL Guidelines for Rack Mounted DevicesFigure 54. Rack Mounting the DVS Rack MountingFurniture Mounting Figure 55. Furniture Mounting the DVSand Central America Extron WarrantyUSA, Canada, South America Japan

Related manuals

Manual 4 pages 24.4 Kb