Adjusting Digital Controls
The set point range for the freezer is
To adjust set point temperatures:
Press the refrigerator or freezer up or down arrow until the desired temperature is reached and shown on the display.
NOTE: Wait at least 24 hours between adjustments and then recheck the temperatures before other adjustments are made.
CONDITION/REASON: | ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR |
- Not set correctly for your | Control 1° higher |
conditions |
|
|
|
REFRIGERATOR too warm | REFRIGERATOR |
- High use or room very warm | Control 1° lower |
|
|
FREEZER too cold | FREEZER Control 1° |
- Not set correctly for your | higher |
conditions |
|
|
|
FREEZER too warm/too little ice | FREEZER Control 1° |
lower | |
|
|
|
|
Additional Digital Control Panel Features
Control Panel Lock
This feature prevents anyone from inadvertently changing settings or switching off the refrigerator.
■To lock the control panel: Press and hold the Control Lockout button for about 3 seconds until the LOCK symbol lights up (yellow LED).
■To unlock the control panel: Press and hold the Control Lockout button for about 3 seconds until the (yellow LED) LOCK symbol light goes off.
NOTE: If a button is pressed with the control panel lock active, the associated LED blinks twice.
GrocerySavor®† Feature
The GrocerySavor® feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures. Use this function to chill the fresh food stored in the refrigerator rapidly.
■Press the GrocerySavor® feature button until the symbol lights up (yellow LED). The GrocerySavor® function shuts off automatically after 6 hours OR manually by pressing the GrocerySavor® feature button again.
NOTE: The temperature display will not change. After 6 hours, the refrigerator returns to the previous temperature set point.
†GrocerySavor is a registered trademark of Sears Brands, LLC.
Fast Freeze
The Fast Freeze feature assists with periods of high freezer use, or freezing large quantities of fresh food.
NOTE: This function must be activated before freezing fresh food.
■Press the Fast Freeze button until the symbol lights up (yellow LED). The Fast Freeze function shuts off automatically after 24 hours OR manually by pressing the Fast Freeze button again.
Power Interruption Indicator
A blinking temperature reading in the Freezer display indicates there has been an interruption of power and shows the warmest temperature reached in the freezer compartment during the power interruption. The temperature reading will continue to blink until the Freezer up or down button is pushed.
NOTE: Check the condition of the food in both compartments before refreezing it or using it.
CrisperHumidityControl
You can control the amount of humidity in the
LOW (open) for best storage of fruits and vegetables with skins. HIGH (closed) for best storage of fresh, leafy vegetables.
WaterandIceDispensers
WARNING
Cut Hazard
Use a sturdy glass when dispensing ice or water.
Failure to do so can result in cuts.
Your electronic dispenser offers several options: the ability to select crushed or cubed ice, a light that turns on when you use the dispenser or press the LIGHT button, and a lock option to avoid accidental dispensing.
The Ice Dispenser
Ice dispenses from the ice maker storage bin in the freezer. When the dispenser lever is pressed:
■A trap door opens in a chute between the dispenser and the ice bin. Ice moves from the bin and falls through the chute.
■When you release the dispenser lever, the trap door closes and the ice dispensing stops. The dispensing system will not operate when the freezer door is open.
Before dispensing ice, select which type of ice you prefer.
■For cubed ice, press the arrow button pointing toward the cubed ice display until the cubed ice symbol lights up (yellow LED).
■For crushed ice, press the arrow button pointing toward the crushed ice display until the crushed ice symbol lights up (yellow LED).
7