RH Door Frame To Cavity Seal Adjustment

SERVICE PROCEDURES (REMOVAL/REPLACEMENT)

4To gain access, remove the screws holding the panel in place.

5. Pull the panel towards the back of the oven to remove.

6. Cavity probe is located ABOVE and to the RIGHT of the cavity motor .

7. Disconnect the 2 BROWN probe wires at the temperature probe.

8. The probe can now be removed from inside the oven .

9. Reinstall the replacement probe in reverse manner .

BA plate secured to outer mount hole increases pressure on cavity seal

Fig. 2

The RH door frame to cavity seal pressure can be increased or decreased, by adjustment of the handle latch engagement hook tension before the door handle locks closed.

Loosen the small set screw, position the handle hook target in or out, and test for effect . Once the proper secure the target set screw.

Door To Cavity Seal Adjustments

1 . Close the door, and determine the area (s) of air leakage. (Use of a dollar bill between the door, and cavity seal, is a sufficient reference.

2Open the door and move upper, and lower, BA plate hold down counter sunk screws.

3. Position the door rod upper, and lower, BA plates to increase, or decrease, pressure on the cavity seal, where needed. (Refer to figures 1, and 2, )

BA plate

secured to

inner mount hole reduces pressure on

cavity seal.

Fig. 1

RH door frame to cavity seal adjustment area .

Part # MPSM07 (03/24/08)

Page 59

MP-GS, MP-GD-10-S specifications

The Garland MP-GD-10-S and MP-GS are innovative electric pizza ovens designed for commercial applications, particularly in restaurants, pizzerias, and cafes. These ovens combine advanced technology with user-friendly features to deliver high-quality pizza quickly and efficiently.

One of the standout features of the Garland MP-GD-10-S is its dual-deck design, allowing operators to prepare two separate pizzas at once. This is a significant advantage during peak hours, as it enhances productivity without compromising quality. The MP-GS model boasts a similar configuration, promoting efficient cooking while also providing versatility in menu offerings.

Both models are equipped with powerful heating elements that ensure rapid heat-up times and consistent cooking temperatures. This technology is crucial for achieving the perfect pizza crust, as it facilitates even heat distribution across the cooking surface. The ovens also feature adjustable temperature controls, allowing users to tailor the cooking environment according to specific recipes or customer preferences.

The Garland MP-GD-10-S and MP-GS come with durable stainless steel exteriors, which not only contribute to an appealing aesthetic but also ensure easy cleaning and maintenance. The removable crumb tray further simplifies the cleanup process, allowing operators to focus on their culinary creations rather than time-consuming maintenance tasks.

Another notable characteristic of these ovens is their user-friendly controls. The intuitive interface allows staff to operate the ovens with minimal training, reducing the likelihood of errors and enhancing overall efficiency in the kitchen. Additionally, both models utilize a reliable digital timer for precise cooking times, ensuring that each pizza is cooked to perfection.

In terms of safety, the Garland MP-GD-10-S and MP-GS are equipped with sturdy door hinges and double-walled construction, promoting temperature retention and preventing exterior overheating. This design not only enhances safety in the kitchen but also optimizes energy efficiency, making them economical choices for busy food establishments.

Overall, the Garland MP-GD-10-S and MP-GS are exceptional electric pizza ovens that embody cutting-edge technology and practical design. Their combination of productivity, user-friendliness, and durable construction makes them a valuable addition to any commercial kitchen, catering to the demands of fast-paced culinary environments while ensuring top-notch pizza quality. Whether for a bustling pizzeria or a cozy cafe, these ovens are tailored to meet the needs of today’s food service professionals.