Elitair PN-I Automatic Light Plus Motor Operation, Automatic Light Operation, Maintenance, Fuse

Page 15

B = OFF/SPEED I

C = SPEED II

D = SPEED III

E = AUTOMATIC STOP TIMER – 15 minutes

L = LOGIC

The “automatic stop timer” delays stopping of the hood, which will continue functioning for 15 minutes at the operating speed set at the time this function is activated.

• AUTOMATIC LIGHT PLUS MOTOR OPERATION

Ensure that the cooker hood is in the OFF position and depress the logic button. The motor starts up at the speed selection 1 and the lights remain switched off. When the Logic function detects the presence of a person or an increase in fumes and/or vapour, the lights turn on automatically and the motor moves to speed selection 2. After 15 seconds the light switches off and the motor returns to the speed selection 1. Depress the Logic button to disactivate the Logic function.

• AUTOMATIC LIGHT OPERATION

Ensure that the the cooker hood is in the OFF position, depress the light button and then the Logic button. The lights switch on automatically when the Logic function detects the presence of a person.The light switches off after 15 seconds.Depress the Logic button to disactivate the Logic function.

• AUTOMATIC MOTOR OPERATION

Ensure that the the cooker hood is in the OFF position, depress the motor start button on speed selection 1 or 2 and then the Logic button. When the Logic function detects the presence of a person or the increase of fumes and/or vapour it will increase the motor speed automatically. Depress the Logic button in order to disactivate the Logic function.

MAINTENANCE

It is recommended to operate the appliance prior to cooking. It is recommended to leave the appliance in operation for 15 minutes after cooking is terminated in order to completely eliminate cooking vapours and odours. The proper function of the cooker hood is condi- tioned by the regularity of the maintenance operations.

The anti-grease filters capture the grease particles suspended in the air, and are therefore subject to clogging according to the frequency of the use of the appliance. In order to prevent fire hazard, it is recommendable to clean the filter at a maximum of 2 months by carrying out the following instructions:

- Remove the filters from the cooker hood and wash them in a solution of water and neutral liquid detergent, leaving to soak.

- Rinse thoroughly with warm water and leave to dry.

- The filters may also be washed in the dishwasher. The aluminium panels may alter in colour after several washes. This is not cause for customer complaint nor replacement of panels.

Clean the fan and other surfaces of the cooker hood regularly using a cloth moistened with denatured alcohol or non abrasive liquid detergent.

FUSE

The halogen lamps circuit is controlled by a fuse 5x20 mm, 125V 5A. In case of neces- sity it can be replaced only by specialized personnel.

- 15 -

Image 15
Contents Page Page Page Page Max 0-1/8 Page = C 3-9/16+A+25-9/16+B Page Englishusa Important Safety Instructions For Residential USE onlyInstallation Instructions Page Green /YELLOW InstallationBlack WhiteUSE If the apparatus is equipped with the following controls BIf the apparatus is equipped with the following controls C = OFF = Speed If the apparatus is equipped with the following controls DIf the apparatus is equipped with the following controls E Automatic Motor Operation MaintenanceAutomatic Light Plus Motor Operation Automatic Light OperationFrançaisf Piers Instructions D’INSTALLATION Generalites Branchement électriqueNoir = L ligne Blanc = N neutre Vert / Jaune = G terre Si l’appareil dispose des commandes suivantes a a = OFF Montage DE LA Hotte= Vitesse Si l’appareil dispose des commandes suivantes C Si l’appareil dispose des commandes suivantes BFonctionnement automatique lumières plus moteur Si l’appareil dispose des commandes suivantes DSi l’appareil dispose des commandes suivantes E = LogiqueFusible Fonctionnement automatique lumièresFonctionnement automatique moteur MantenanceEspañole Instrucciones Para LA Instalacion Page Conexión a la alimentación eléctrica GeneralidadesMontaje DE LA Campana USO= Velocidad I C = Velocidad Si el aparato está equipado con los siguientes comandos C = Reset Indicador DE Saturación DEL Filtro= Velocidad = LUZ = OFF/ Velocidad I C = VelocidadFuncionamiento automático de luces y motor = LógicaFuncionamiento automático luces Funcionamento automático motorMantención Leggere Completamente LE Istruzioni Prima DI Procedere ItalianoiIstruzioni PER L’INSTALLAZIONE Page GENERALITA’ Collegamento all’alimentazione elettricaNero = L linea Bianco = N neutro Verde / Giallo = G terra Montaggio della cappa Se l’apparecchio è provvisto dei seguenti comandi a a = OFF= VELOCITA’ I C = VELOCITA’ Se l’apparecchio è provvisto dei seguenti comandi C Se l’apparecchio è provvisto dei seguenti comandi BFunzionamento automatico luci Se l’apparecchio è provvisto dei seguenti comandi E= Logica Funzionamento automatico luci più motoreFunzionamento automatico motore ManutenzioneFusibile 3LIK0125