Maytag MGR5875QDW During the Self-Clean Cycle, After Self-Cleaning, Smoke and Smells, Sounds

Page 20

Care & Cleaning

5.Press the Autoset 0 pad to scroll through the self-cleaning settings.

HVy (Heavy Soil, 4 hours)

MEd (Medium Soil, 3 hours)

LITE (Light Soil, 2 hours)

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, CLEAN and DELAY will light and LOCK will flash in the display. When the oven door latches, LOCK will stop flashing and light continuously to show that the oven is set for a delayed clean operation. The delay time will display.

During the Self-Clean Cycle

When LOCK shows in the display, the door cannot be opened. To prevent damage to the door, do not force the door open when LOCK is displayed.

Smoke and Smells

You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time.

Smoke may also occur if the oven is heavily soiled or if a pan was left in the oven.

Sounds

As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven.

After Self-Cleaning

About one hour after the end of the self-clean cycle, LOCK will turn off. The door can then be opened.

Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be re- moved during the next clean cycle.

If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move.

Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance.

A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self-clean cycle. This discoloration is normal and will not affect perfor- mance.

Notes:

•If the oven door is left open, “door” will flash in the display and a signal will beep until the door is closed and the Clean pad is pressed again.

•If more than five seconds elapse between pressing the Clean pad and the Autoset 0 pad, the program will automatically return to the previous display.

•The oven door will be damaged if the oven door is forced to open when LOCK is still displayed.

19

Image 20

Contents Gas Precision Touch Control Table of ContentsUse & Care Guide Recognize Safety Symbols, Words, Labels InstructionsGeneral Instructions CanadaImportant Safety Instructions Child SafetyTo Prevent Fire or Smoke Damage Case of FireCooking Safety Utensil SafetyCleaning Safety Self-Clean OvenImportant Safety Notice and Warning Save These Instructions for Future ReferenceOperating During a Power Failure Surface CookingSurface Controls Pilotless IgnitionPower Boost Burner CooktopSealed Gas Burners Burner GratesUsing the Touchpads Oven CookingControl Panel ClockLocking the Control Oven Door TimerFault Codes Baking Baking with ConvectionBaking Notes Baking Differences Between Your Old and New OvenTo set Convect Roast Roasting With ConvectionRoasting Notes Delay Cook & Hold Cook & HoldBroiling Chart BroilingBroil Notes Rack Total Food PositionTo cancel Keep Warm Press the Cancel pad Remove food from the ovenKeep Warm Keep Warm NotesTo cancel the Sabbath Mode Automatic Shut-Off Sabbath ModeSabbath Mode Notes Favorite Adjusting the Oven TemperatureChanging Temp F/C Oven Fan Oven VentOven Racks Oven LightCreate-A-SpaceTMHalf Rack Baking Layer Cakes on Two RacksTo Delay a Self-Clean Cycle Before Self-CleaningTo set Self-Clean During the Self-Clean Cycle After Self-CleaningSmoke and Smells SoundsPart Procedure Care & CleaningCleaning Procedures To restore ease of movement, then wipe off excess oil FirstGlass Stainless SteelMaintenance Oven WindowLeveling Legs Electrical ConnectionRemoval of Gas Appliance Storage DrawerTroubleshooting Problem SolutionBrowning Inches between pans and oven wallOff. This is normal Word is not displayedControl and door may be locked. See Page Maytag Major Appliance Warranty Cuisinière à gaz à touches de précision Table des matièresInstructions de sécurité importantes Les instructions de sécurité importantes et les paragraphesInstructions générales Pour éviter un incendie ou des dommages par la fuméeEn cas d’incendie Sécurité pour les enfantsFamiliarisation avec l’appareil Cuisson et sécuritéUstensiles et sécurité Nettoyage et sécuritéConserver ces instructions pour consultation ultérieure Four autonettoyantAvertissement et avis important pour la sécurité Cuisson sur la surface Brûleur de haute performance Power Boost Surface de cuissonBrûleurs à gaz scellés Brûleur de mijotageTableau de commande Cuisson dans le fourUtilisation des touches HorlogeVerrouillage des commandes et de la porte du four MinuterieCuisson avec convection Codes d’anomalieCuisson courante Programmation du rôtissage avec convection Rôtissage avec convectionRemarques sur le rôtissage Cuisson et maintien Cuisson et maintien différésMaintien au chaud Remarques sur la fonction de maintien au chaudProgrammation du Maintien au chaud Annulation du maintien au chaudCuisson au gril Remarques sur la cuisson au grilTableau de cuisson au gril Position DES Degré DE Temps DE AlimentsArrêt automatique Mode sabbat Remarques sur le mode sabbatAnnulation du mode sabbat SAb sera affiché et clignotera pendant cinq secondesFavori Ajustement de la température du fourChangement de la température F/C Allumage sans flamme de veille Ventilateur du fourÉvent du four Grilles du fourToujours libre pour loger une cocotte Demi-grille Create-A-SpaceMCCuisson de gâteaux à étages sur deux grilles Nettoyage Avant l’autonettoyageProgrammation de l’autonettoyage Démarrage différé d’un cycle d’autonettoyageAprès le cycle d’autonettoyage Pendant le cycle d’autonettoyageFumée et odeurs BruitsMéthodes de nettoyage Pièce NettoyagePanneaux Latéraux, tiroirDe remisage Et poignéesEntretien Dépose Déplacement d’un appareil à gazTiroir de remisage Problème Solution Recherche des pannesLes commandes et la porte sont peut-être verrouillées. Voir Impossibilité d’autonettoyageParticulièrement les résidus d’aliments acides ou sucrés La porte du four ne se déverrouilleGarantie DES Gros Appareils Ménagers Maytag Corporation Estufa a Gas con Control a Precisión Sensible al Tacto Tabla de MateriasCanadá InstruccionesSeguridad Instrucciones Generales Para Evitar un Incendio o Daño Causado por el HumoEn Caso de Incendio Seguridad para los NiñosGeneralidades Seguridad Para CocinarHorno Autolimpiante Utensilios ApropiadosSeguridad de la Limpieza Aviso y Advertencia Importante Sobre Seguridad Conserve estas Instrucciones para Referencia FuturaCocinando en la Estufa Controles SuperioresEncendido Sin Piloto Perillas de Control de los Elementos SuperioresQuemador de Alto Rendimiento Power Boost CubiertaQuemadores de Gas Sellados Quemador para Cocinar a Fuego LentoCocinando en el Horno Panel de ControlUso de las Teclas ‘Clock’ RelojBloqueo de los Controles y de la Puerta del Horno Códigos de Errores‘Timer’ Temporizador Horneado Horneado por ConvecciónNotas sobre Horneado Modelos selectosAsado por Convección ‘Cook & Hold’ Cocción yNotas sobre Asado Mantener Caliente‘Delay Cook & Hold’ Cocción y Mantener Caliente Diferido‘Broiling’ Asar a la Parrilla Notas Sobre Asado a la ParrillaTabla de Asar a la Parrilla Para programar ‘Broil’ AsadoPara cancelar ‘Keep Warm’ ‘Keep Warm’ Mantener CalienteNotas sobre ‘Keep Warm’ Para programar ‘Keep Warm’Notas Sobre el Modo Sabático Para cancelar el Modo SabáticoCierre Automático Modo Sabático ‘Favorite’ Favorito Ajuste de la temperatura del hornoCambio de la temperatura de F/C Ventilador del horno Parrillas del HornoRespiradero del Horno Posiciones de la ParrillaMedia Parrilla Create-A-SpaceMR Horneado de Pasteles de Capas en Dos ParrillasDos parrillas Use la posición 3 y 6 o 2 y Coloque los pasteles en las parrillas como se muestraPara programar ‘Self-Clean’ Autolimpieza Antes de la AutolimpiezaPara diferir un ciclo de autolimpieza Limpie el marco del horno, el marco deDespués del ciclo de autolimpieza Durante el ciclo de autolimpiezaHumo y Olores SonidosProcedimientos de Limpieza Pieza Procedimiento DE LimpiezaCuidado y Limpieza Mantenimiento Retiro de la Estufa a Gas Gaveta de AlmacenamientoPara sacar Para volver a colocarProblema Solución Localización y Solución de AveríasCódigos de Errores El horno no se autolimpiaPáginas Verifique si la puerta está cerradaDE Maytag Corporation