PostFin extnrun | 72.0ºC |
| 5m00 | |
Fin |
|
| 10.0ºC | |
Post hold |
| 10.0 | ||
[ | , | to edit | ] | |
[ | to save |
| ] | |
To edit a temperature, type in the required temperature. In the example here, the heated lid temperature is being edited.
Press “Enter” 
to accept.
Use the “Down Arrow” and/or the “Up
Arrow” keys to select the next field or step you wish to edit.
To edit a field with on/off settings, first select the field and press “Enter”
Use the “Up Arrow” and “Down Arrow” keys to toggle between the settings.
Press “Enter” 
to accept.
To edit a step with both a temperature and a time, first press “Enter” and type in the new temperature. Press “Enter” again. Now type in the new time. The default is minutes.
1.For whole minutes, type the number required then “Enter”
2.To toggle between minutes and hours, use the “Decimal Point” key.
3.For values less than 1 minute, first press the “Decimal Point” key followed by the number of seconds required.
4.For minutes and seconds, type the number of minutes followed by the “Decimal Point” key then the number of seconds.
Once the values have been added, press “Enter” to accept.
Once you have finished editing and you are happy with the changes, press the
“End” key 
followed by the “Enter” key 
to save.
If you press the “End” key 
a second time for ‘No’ then all the changes you have made will be lost.
18