Omega Engineering 20, 48, 30, 25 To insert additional steps, To delete a step, to edit the step as

A new stage will be inserted which consists of a ‘Number cycles’ field and one step.

Edit the number of cycles by typing the number required then press "Enter"

Use the “Down Arrow” key to move to the step.

Press “Enter”	to edit the step as
described above.
Press “Enter”	again to accept.

To insert additional steps

To insert a new step before the first step, use the “Up Arrow” or “Down Arrow” keys to select ‘Number cycles’.

Press the “Decimal Point” key to insert a new step.

To insert a new step after an existing step, use the “Up Arrow” or “Down Arrow” keys to select the step.

Press the “Decimal Point” key to insert a new step.

To delete a step

Use the “Up Arrow” or “Down Arrow” keys to select the step you wish to delete.

Press "Delete" to delete the step.

The prompt line will flash between 'DEL

STEP?' and 'YES or NO'.

Press “Enter” or

Press “End” step.

to delete the step.

to return to editing the

21